Publications
- Peer-Reviewed Journal Papers
-
Keynote/Plenary/Invited Presentations
- Keynote/Plenary - Prof. Amar Mohanty
- Keynote/Plenary - Prof. Manjusri Misra
- Invited Presentations - Prof. Amar Mohanty
- Invited Presentations - Prof. Manjusri Misra
- Conference Presentations
- Books and Book Chapters
- Other BDDC publications
Peer-Reviewed Journal Papers
2023 | |
J469 | Itabana, B.E., Pal, A.K., Mohanty, A.K., Misra, M. (2023). “Biodegradable blown film composite from poly (butylene adipate-co-terephthalate) and talc: Effect of uniaxial stretching on mechanical and barrier properties”. Food Packaging and Shelf Life, 39, 101147. PDF Article Link https://doi.org/10.1016/j.fpsl.2023.101147 |
J468 | Patel, H., Weldekidan, H., Mohanty, A.K., Misra, M. (2023). “Effect of physicochemical activation on CO2 adsorption of activated porous carbon derived from pine sawdust”. Carbon Capture Science & Technology, 8, 100128. PDF Article Link https://www.sciencedirect.com/science/article/pii/S2772656823000325 |
J467 | McNeill, D.C., Pal, A.K., Mohanty, A.K., Misra, M. (2023). “High Biomass Filled Biodegradable Plastic in Engineering Sustainable Composites”. Composites Part C: Open Access, 100388. PDF Article Link https://doi.org/10.1016/j.jcomc.2023.100388 |
J466 | Pesaranhajiabbas, E., Misra, M., Mohanty, A.K. (2023). “Recent progress on biodegradable polylactic acid based blends and their biocomposites: A comprehensive review”. International Journal of Biological Macromolecules, 126231. PDF Article Link https://doi.org/10.1016/j.ijbiomac.2023.126231 |
J465 | Mohanty, A.K., Vivekanandhan, S., Tripathi, N., Roy, P., Snowdon, M., Drzal, L.T., Misra, M. (2023). “Sustainable Composites for Lightweight and Flame Retardant Parts for Electric Vehicles to Boost Climate Benefits: A Perspective”. Composites Part C: Open Access, 100380. PDF Article Link https://doi.org/10.1016/j.jcomc.2023.100380 |
J464 | Varsally, Z.B., Tripathi, N., Weldekidan, H., Rodriguez-Uribe, A., Das, O., Mohanty, A.K., Misra, M. (2023). “A Sustainable Approach for Developing Biocarbon from Lignin and its Utilization in Recycled Ocean Nylon based Biocomposites”. Composites Part C: Open Access, 100376. PDF Article Link https://doi.org/10.1016/j.jcomc.2023.100376 |
J463 | Singh, M.K., Mohanty, A.K., Misra, M. (2023). "Upcycling of waste polyolefins in natural fiber and sustainable filler-based biocomposites: A study on recent developments and future perspectives." Composites Part B: Engineering, 110852. PDF Article Link https://doi.org/10.1016/j.compositesb.2023.110852 |
J462 | Lewis, R., Weldekidan, H., Rodriguez, A.U., Mohanty, A.K., Mielewski, D.F., Misra, M. (2023). "Design and Engineering of Sustainable Biocomposites from Ocean-Recycled Polypropylene-based Polyolefins and Almond Shell and hull." Composites Part C: Open Access, 100373. PDF Article Link https://doi.org/10.1016/j.jcomc.2023.100373 |
J461 | Das, O., Mensah, R.A., Balasubramanian, K.B.N., Shanmugam, V., Försth, M., Hedenqvist, M.S., Rantuch, P., Martinka, J., Jiang, L., Xu, Q., Neisiany, R.E., Lin, C., Mohanty, A., Misra, M. (2023). "Functionalised biochar in biocomposites: The effect of fire retardants, bioplastics and processing methods". Composites Part C: Open Access, 11, 100368. PDF Article Link https://doi.org/10.1016/j.jcomc.2023.100368 |
J460 | Vijaybabu, T.R., Ramesh, T., Pandipati, S., Mishra, S., Sridevi, G., Raja, C.P., Mensah, R.A., Das, O., Misra, M., Mohanty, A.K., NB, K.B. (2023). "High Thermal Conductivity Polymer Composites Fabrication through Conventional and 3D Printing Processes: State-of-the-Art and Future Trends". Macromolecular Materials and Engineering, 2300001. |
J459 | Root, K.P., Pal, A.K., Pesaranhajiabbas, E., Mohanty, A.K., Misra, M. (2023). "Injection Moulded Composites from High Biomass Filled Biodegradable Plastic: Properties and Performance Evaluation for Single-Use Applications". Composites Part C: Open Access, 100358. |
J458 | Goodrum, R., Weldekidan, H., Li, H., Mohanty, A.K., Misra, M. (2023). "Graphene-based nanostructures from green processes and their applications in biomedical sensors". Advanced Industrial and Engineering Polymer Research (In Press). |
J457 | Pal, A.K., Misra, M., Mohanty, A.K. (2023). "Silane treated starch dispersed PBAT/PHBV-based composites: Improved barrier performance for single-use plastic alternatives". International Journal of Biological Macromolecules, 229, 1009-1022 |
J456 | Roy, P., Mohanty, A.K., Dick, P., Misra, M. (2023). "A review on challenges and choices for food waste valorization: Environmental and economic impacts". ACS Environmental Au, 3, 58-75. |
J455 | Harder, N., Rodriguez-Uribe, A., Snowdon, M., Misra, M., Mohanty, A.K. (2023). "Hop natural fiber reinforced poly (butylene succinate-co-butylene adipate)(PBSA) biodegradable plastic: effect of fiber length on performance of biocomposites". Materials Advances. |
J454 | Zytner, P., Pal, A.K., Wu, F., Rodriguez-Uribe, A., Mohanty, A.K., Misra, M. (2023). "Morphology and Performance Relationship Studies on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/Poly(butylene adipate-co-terephthalate)-Based Biodegradable Blends". ACS Omega, 8(2), 1946–1956. |
2022 | |
J453 | Tripathi, N., Rodriguez-Uribe, A., Weldekidan, H., Misra, M., Mohanty, A. (2022). "Upcycling of waste jute biomass to advanced biocarbon materials: the effect of pyrolysis temperature on their physicochemical and electrical properties". Material Advances 24 (2022). |
J452 | Arshad, M., Mohanty, A., Van Acker, R., Riddle, R., Todd, J., Khalil, H., Misra, M. (2022). "Valorization of camelina oil to biobased materials and biofuels for new industrial uses: a review". RSC Advances, 2022, 12, 27230-27245. |
J451 | Surendren, A., Mohanty, A.K., Liu, Q., Misra, M. (2022). "A review of biodegradable thermoplastic starches, their blends and composites: recent developments and opportunities for single-use plastic packaging alternatives". Green Chemistry, 2022, 24, 8606-8636. |
J450 | Gonzalez de Gortari, M., Misra, M., Mohanty, A. K. (2022). "Polyphthalamide polymers: A review on synthesis, properties, and advance manufacturing and emerging applications". Journal of Applied Polymer Science, 139 (40), 52965. |
J449 | Debevc, S., Weldekidan, H., Snowdon, M., Vivekanandhan, S., Wood, D.F., Misra, M., Mohanty, A.K. (2022). "Valorization of almond shell biomass to biocarbon materials: Influence of pyrolysis temperature on their physicochemical properties and electrical conductivity". Carbon Trends, 9, 100214. |
J448 | Mensah, R.A., Vennström, A., Shanmugam, V., Försth, M., Li, Z., Restas, A., Neisiany, R.E., Sokol, D., Misra, M., Mohanty, A.K., Hedenqvist, M., Das, O. (2022). "Influence of biochar and flame retardant on mechanical, thermal, and flammability properties of wheat gluten composites". Composites Part C: Open Access, 9, 100332. |
J447 | Feijoo, P., Mohanty, A.K., Rodriguez-Uribe, A., Gámez-Pérez, J., Cabedo, L., Misra, M. (2022). "Biodegradable blends from bacterial biopolyester PHBV and bio-based PBSA: Study of the effect of chain extender on the thermal, mechanical and morphological properties". International Journal of Biological Macromolecules, 225,1291-1305. |
J446 | Weldekidan, H. A., Mohanty, A. K., & Misra, M. (2022). "Upcyclying of plastic wastes and biomass for sustainable graphitic carbon production: A critical review". ACS Environmental Au, 2, 510-522. |
J445 | Lim, J., Pesaranhajiabbas, E., Snowdon, M. R., Mohanty, A. K., & Misra, M. (2022). "Sustainable biocomposites from biofuel co-product and biodegradable plastic: Effect of pyrolysis and compatibilizer on performance". Composites Part C: Open Access, 100301. |
J444 | Gonzalez de Gortari, M., Misra, M., Mohanty, A.K. (2022). "Polyphthalamide (PPA) polymers: A review on synthesis, properties and advance manufacturing and emerging applications". Journal of Applied Polymer Science,139(40), e52965. |
J443 | Abdelwahab, M. A., Chang, B. P., Mohanty, A. K., & Misra, M. (2022). "Waste valorization in sustainable engineering materials: Reactive processing of recycled carpets waste with polyamide 6". Polymer Testing, 114, 107681. |
J442 | Mohanty, A., Wu, F., Mincheva, R., Hakkarainen, M., Raquez, J.M., Mielewski, D.F., Narayan, R., Netravali, A.N. & Misra, M. (2022). "Sustainable polymers". Nature Reviews Methods Primers, 2(1), 1-27. |
J441 | Pesaranhajiabbas, E., Pal, A., Rodriguez-Uribe, A., Mohanty, A. K., & Misra, M. (2022). "Biodegradable polymer blends: Studies on performance control through droplet to co-continuous morphology". ACS Applied Polymer Materials 4, 5546−5556. |
J440 | Ford, R., Misra, M., Mohanty, A. K., & Brandon, S. (2022). "Effect of simulated mass-tunable auxetic midsole on vertical ground reaction force". Journal of Biomechanical Engineering, 144(11), 111007. |
J439 | Mishra, R., Mohanty, A. K., & Misra, M. (2022). "Value-added biocarbon production through slow pyrolysis of mixed bio-oil wastes: Studies on their physicochemical characteristics and structure-property-processing co-relation". Biomass Conversion and Biorefinery, 1-15. |
J438 | Ford, R., Pal, A., Scott, B., Misra, M., Mohanty, A. K. (2022). "The influence of fused filament fabrication printing parameters on the mechanical properties of a thermoplastic elastomer". Rapid Prototyping Journal, 28(10), 1906-1919. |
J437 | Scharnowski, J. B., Rodriguez‐Uribe, A., Pal, A. K., Wang, T., Snowdon, M. R., Misra, M., & Mohanty, A. K. (2022). "Biocomposites from thermoplastic postindustrial waste starches filled with mineral fillers for single‐use flexible packaging". Macromolecular Materials and Engineering, 2100960. |
J436 | Roy, P., Mohanty, A. K., & Misra. M. (2022). "Microplastics in the ecosystems: Their implications and mitigation pathway". Environmental Sciences Advances, 2022 (1), 9-29. (Awarded Best Review in the Environmental Science: Advances Best Papers of 2022, by the publisher - The Royal Society of Chemistry (RSC)) |
J435 | Gupta, A., Mohanty, A. K., & Misra, M. (2022). "Biocarbon from spent coffee ground and their sustainable biocomposites with recycled water bottle and bale wrap: A new life for waste plastics and waste food residues for industrial uses". Composites Part A: Applied Science and Manufacturing, 154, 106759. |
J434 | Mishra, R., Misra, M., & Mohanty, A. K. (2022). "Value-added bio-carbon production through slow pyrolysis of waste bio-oil: Fundamental studies on their structure-property-processing correlation". ACS Omega 7 (2), 1612-1627. |
J433 | Chen, G., Misra, M., & Mohanty, A. K. (2022). "Studies on curing kinetics of polyphenylene sulfide (PPS): An insight into effects of curing temperature and time on structure and thermo-mechanical behavior". Journal of Applied Polymer Science, 51817. |
2021 |
|
J432 | Sankari, M.S, Vivekanandhan, S., Misra, M. Mohanty, A.K. (2021). "Review on oil cakes as the sustainable agro-industrial feedstock for biocarbon materials". ChemBioEng Reviews, 9(1), 21–41. |
J431 | Rodriguez-Uribe, A., Wang, T., Pal, A.K., Wu, F., Mohanty, A.K., Misra, M. (2021). "Injection moldable hybrid sustainable composites of PBS and PHBV reinforced with talc and starch as potential alternatives to single-use plastic packaging". Composites Part C: Open Access, 100201. |
J430 | Maldonado, B., Pal, A., Mohanty, A. K. & Misra, M. (2021). "Sustainable 3D printed composites from recycled ocean plastics and pyrolyzed soy-hulls: Optimization of printing parameters, performance studies and prototypes development". Composites Part C - Open Access, 100197. |
J429 | Pal, A., Mohanty, A. K., & Misra, M. (2021). "Additive manufacturing technology of polymeric materials for customized products: Recent developments and future prospective". RSC Advances, 11(58), 36398-36438. |
J428 | Gonzalez de Gortari, M., Wu, F., Mohanty, A. K., & Misra, M. (2021). "Evaluating the performance of a semiaromatic/aliphatic polyamide blend: The case for polyphthalamide (PPA) and polyamide 4, 10 (PA410)". Polymers, 13(19), 3391. |
J427 | Allohverdi, T., Mohanty, A. K., Roy, P., & Misra, M. (2021). "A review on current status of biochar uses in agriculture". Molecules, 26(18), 5584. |
J426 | Chang, B. P., Rodriguez-Uribe, A., Mohanty, A. K., & Misra, M. (2021). "A comprehensive review of renewable and sustainable biosourced carbon through pyrolysis in biocomposites uses: Current development and future opportunity". Renewable and Sustainable Energy Reviews, 152, 111666. |
J425 | Tripathi, N., Misra, M., & Mohanty, A. K. (2021). "Durable polylatic acid (PLA) based sustainable engineered blends and biocomposites: Recent developments, challenges and oppurtunities". ACS Engineering AU, 1 (1), 7-38.
|
J424 | Gonzalez de Gortari, M., Misra, M., Gregori, S., & Mohanty, A. K. (2021). "Statistical design of biocarbon reinforced sustainable composites from blends of polyphthalamide (PPA) and polyamide 4,10 (PA410)". Molecules, 26(17), 5387. |
J423 | Roy, P., Mohanty, A. K., Wagner, A., Sharif, S., Khalil, H., & Misra, M. (2021). "Impacts of COVID-19 outbreak on the municipal solid waste management: Now and beyond the pandemic". ACS Environmental Au, 1, 32−45. |
J422 | Roy, P., Ashton, L., Wang, T., Corrandini, M. G., Fraser, E. D. G., Thimmanagari, M., Tiessan, M., Bali, A., Saharan, K. M., Mohanty, A. K., & Misra, M. (2021). "Evolution of drinking straws and their environmental, economic and societal implications". Journal of Cleaner Production, 128234. |
J421 | Diederichs, E., Picard, M., Chang, B. P., Misra, M., & Mohanty, A. K. (2021). "Extrusion based 3D printing of sustainable biocomposites from biocarbon and poly(trimethylene terephthalate)". Molecules, 26(14), 4164. |
J420 | Watt, E., Picard, M., Maldonado, B., Abdelwahab, M., Mielewski, D.F., Drzal, L.T., Misra, M. & Mohanty, A.K. (2021). “Ocean plastics: Environmental implications and potential routes for mitigation - A perspective”. RSC Advances, 11, 21447-21462. |
J419 | Yokesahachartm C., Yoksan, R., Khanoonkon, N., Mohanty, A.K., & Misra, M. (2021). "The effect of jute fibers on morphological characteristics and properties of thermoplastic starch/biodegradable polyester blend". Cellulose, 28(9), 5513–5530. |
J418 | Meereboer, K., Pal, A., Misra, M., & Mohanty, A.K. (2021). "Green composites from bioplastic blend of poly (hydroxybutyrate-co-valerate) and carbon dioxide-derived poly (propylene carbonate) and filled with corn ethanol industry co-product". ACS Omega, 6 (31), 20103-20111. |
J417 | Wu, F., Misra, M., & Mohanty, A.K. (2021). "Challenges and new opportunities on barrier performance of biodegradable polymers for sustainable packaging". Progress in Polymer Science, 101395. |
J416 | Codou, A., Pin, J.M., Misra, M., & Mohanty, A.K. (2021). "Impact of temperature and in situ FeCo catalysis on the architecture and Young’s modulus of model wood-based biocarbon". Green Chemistry, 23, 3015-3027. |
J415 | Watt, E., Abdelwahab, M., Mohanty, A.K., & Misra, M. (2021). "Biocomposites from biobased polyamide 4,10 and waste corn cob based biocarbon". Composites Part A: Applied Science and Manufacturing, 106340. |
J414 | Paleri, D.M., Rodriguez-Uribe, A., Misra, M., & Mohanty, A.K. (2021). "Pyrolyzed biomass from corn ethanol industry coproduct and their polypropylene-based composites: Effect of heat treatment temperature on performance of the biocomposites". Composites Part B: Engineering, 215, 108714. |
J413 | Vivekanandhan, S., Hariram, M, Rahul, A, Sankari, M.H.S, Mutharamhumar, S., Misra, M., & Mohanty, A.K. (2021). "Novel puffball (Lycoperdon Sp.) spores derived hierarchical nanostructured biocarbon: A preliminary investigation on thermochemical conversion and characterization for supercapacitor applications". Materials Letters, 129432. |
J412 | Gupta, A., Misra, M., & Mohanty, A.K. (2021). "Novel sustainable materials from waste plastics: Compatibilized blend from discarded bale wrap and plastic bottles". RSC Advances, 11(15), 8594–8605. |
J411 | Chang, B.P., Abdelwahab, M.A., Kiziltas, A., Mielewski, D.F., Mohanty, A.K., & Misra, M. (2021). “Effect of a small amount of synthetic fiber on performance of biocarbon-filled nylon-based hybrid biocomposites”. Macromolecular Materials and Engineering, 2000680. |
J410 | Chowdhury, I.H., Abdelwahab, M.A., Misra, M., & Mohanty, A.K. (2021). “Sustainable biocomposites from recycled bale wrap plastic and Agave fiber: Processing and properties evaluation”. ACS Omega, 6(4), 2856-2864. |
J409 | Paleri, D.M., Rodriguez-Uribe, A., Misra, M., & Mohanty, A.K. (2021). "Preparation and characterization of eco-friendly hybrid biocomposites from natural rubber, biocarbon and carbon black". eXPRESS Polymer Letters, 15(3), 236-249. |
J408 | Meereboer, K., Pal, A., Cisneros-Lopez, E., Misra, M., & Mohanty, A.K. (2021). "The effect of natural fillers on the marine biodegradation behaviour of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)(PHBV)". Scientific Reports,11(1), 1-11. |
J407 | Marshall, T., Marangoni, A.G., Corradini, M.G., Rodriguez-Uribe, A., Misra, M., Mohanty, A.K., Rodriguez, B.M., & Pensini, E. (2021). "Path-dependent rheology of carbon particle-hydroxyethylcellulose fluids". Colloids and Surfaces A: Physicochemical and Engineering Aspects, 612, 126000. |
J406 | Abdelwahab, M., Jacob, S., Misra, M., & Mohanty, A.K. (2021). "Super-tough sustainable biobased composites from polylactide bioplastic and lignin for bio-elastomer application". Polymer, 212, 123153. |
J405 | Chen, G., Mohanty, A.K., & Misra, M. (2021). "Progress in research and applications of polyphenylene sulfide blends and composites with carbons". Composites Part B, 108553. |
J404 | Marshall, T., Gravelle, A., Laredo, T., Rodriguez-Uribe, A., Misra, M., Mohanty, A.K., Marangoni, A.G., Lim, L.T., & Pensini, E. (2021). "Zein-based materials: Effects of nanocarbon inclusion and potential applications". Journal of Polymers and the Environment, 1-10. |
2020 | |
J403 | Hedrick, M., Wu, F., Mohanty, A.K., & Misra, M. (2020). "Morphology and performance relationship studies on biodegradable ternary blends of poly(3-hydroxybutyrate-co-3-hydroxyvalerate), polylactic acid, and polypropylene carbonate". RSC Advances, 10(73), 44624-44632. |
J402 | Chapman, G., Pal, A.K., Misra, M., & Mohanty, A.K. (2020). "Studies on 3D printability of novel impact modified nylon 6: Experimental investigations and performance evaluation". Macromolecular Materials and Engineering, 306(2), 2000548. |
J401 | Rodriguez-Uribe, A., Snowdon, M.R., Abdelwahab, M., Codou, A., Misra, M., & Mohanty, A.K. (2020). "Impact of renewable carbon on the properties of composites made by using three types of polymers having different polarity". Journal of Applied Polymer Science, 138(10), 49948. |
J400 | Picard, M., Mohanty. A.K., & Misra, M. (2020). "Recent advances on additive manufacturing of engineering thermoplastics: Challenges and opportunities". RSC Advances, 10(59), 36058-36089. |
J399 | Poursorkhabi, V., Abdelwahab, M., Misra, M., Khalil, H.,Gharabaghi, B., & Mohanty, A.K. (2020). "Processing, carbonization, and characterization of lignin based electrospun carbon fibers: A review". Frontiers in Energy Research, 8, 1-24. |
J398 | Andrzejewski, J., Misra, M., & Mohanty, A.K. (2020). "Development of hybrid composites reinforced with biocarbon/carbon fiber system. The comparative study for PC, ABS and PC/ABS based materials". Composites Part B: Engineering, 200, 108319. |
J397 | Wu, F., Misra, M., & Mohanty, A.K. (2020). "Sustainable green composites from biodegradable plastics blend and natural fibre with balanced performance: Synergy of nano-structured blend and reactive extrusion". Composites Science and Technology, 200, 108369. |
J396 | Meereboer, K., Misra, M., & Mohanty, A.K. (2020). "Review of recent advances on biodegradability of polyhydroxyalkanoate (PHA) bioplastics and their green composites". Green Chemistry, 22(17), 5519-5558. |
J395 | Roy, P., Defersha, F., Rodriguez-Uribe, A., Misra, M., & Mohanty, A.K. (2020). "Evaluation of the life cycle of an automotive component produced from biocomposite". Journal of Cleaner Production, 273, 123051. |
J394 | Gonzalez de Gortari, M., Rodriguez-Uribe, A., Misra, M., & Mohanty, A.K. (2020). "Insights on the structure-performance relationship of polyphthalamide (PPA) composites reinforced with high-temperature produced biocarbon". RSC Advances, 10, 26917-26927. |
J393 | Li, Z., Reimer, C., Wang, T., Mohanty, A. K., & Misra, M. (2020). "Thermal and mechanical properties of the biocomposites of Miscanthus biocarbon and poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)(PHBV)". Polymers, 12(6), 1300. |
J392 | Shamsuyeva, M., Chang, B. P., Vellguth, N., Misra, M., Mohanty, A., & Endres, H. J. (2020). "Surface modification of flax fibers for manufacture of engineering thermoplastic biocomposites". Journal of Composites Science, 4(2), 64. |
J391 | Watt, E., Abdelwahab, M., Snowdon, M., Mohanty, A.K., Khalil, H., & Misra, M. (2020). "Hybrid biocomposites from polypropylene, sustainable biocarbon and graphene nanoplatelets". Scientific Reports, 10(1), 1-13. |
J390 | Pal, A.K., Wu, F., Misra, M., & Mohanty, A.K. (2020). "Reactive extrusion of sustainable PHBV/PBAT-based nanocomposite films with organically modified nanoclay for packaging applications: Compression moulding vs. cast film extrusion". Composites Part B - Engineering, 198, 108141. |
J389 | Smith, M., MP, D., Abdelwahab, M., Mielewski, D., Misra, M., & Mohanty, A.K. (2020). "Sustainable composites from poly(3-hydroxybutyrate) (PHB) bioplastic and Agave natural fibre". RSC Green Chemistry, 22, 3906-3916. |
J388 | Zytner, P., Wu, F., Misra, M, & Mohanty, A.K (2020). "Toughening of biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/ poly(ɛ-caprolactone) blends by insitu reactive compatibilization". ACS Omega, 5(25), 14900–14910. |
J387 | Vigil Fuentes, M., Thakur, S.,Wu, F., Misra, M., Gregori, S., & Mohanty, A.K. (2020). “Study on the 3D printability of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) / poly(lactic acid) blends with chain extender using fused filament fabrication” Scientific Reports, 10, 11804. |
J386 | Chang, B.P., Mohanty, A.K., & Misra, M. (2020). "Studies on durability of sustainable biobased composites: A review". RSC Advances, 10, 17955-17999. |
J385 | Balint, T., Chang, B.P., Mohanty, A.K., & Misra, M. (2020). "Underutilized agricultural co-product as a sustainable biofiller for polyamide 6,6: Effect of carbonization temperature". Molecules, 25(6), 1455. |
J384 | Meereboer, K.W., Pal, A.K., Misra, M., & Mohanty, A.K. (2020). "Sustainable PHBV/cellulose acetate blends: Effect of a chain extender and a plasticizer". ACS Omega, 5(24), 14221-14231. |
J383 | Tran, D.S., Songmene, V., Ngo, A.D., Kouam, J., Rodriguez-Uribe, A., Misra, M., & Mohanty, A.K. (2020). "Experimental investigation on machinability of polypropylene reinforced with Miscanthus fibers and biochar". Materials, 13(5),1181. |
J382 | Picard, M., Thakur, S., Misra, M., Mielewski, D. F., & Mohanty, A. K. (2020). "Biocarbon from peanut hulls and their green composites with biobased poly(trimethylene terephthalate)(PTT)". Scientific Reports, 10(1), 1-14. |
J381 | Gowman, A., Rodriguez-Uribe, A., Defersha, F., Mohanty, A.K., & Misra, M. (2020). "Statistical design of sustainable composites from poly(lactic acid) and grape pomace". Journal of Applied Polymer Science, 137(36), 49061. |
J380 | Wu, F., Misra, M., & Mohanty, A. K. (2020). "Tailoring the toughness of sustainable polymer blends from biodegradable plastics via morphology transition observed by atomic force microscopy". Polymer Degradation and Stability,173, 109066. |
J379 | Andrzejewski, J., Cheng, J., Anstey, A., Mohanty, A. K., & Misra, M. (2020). "Development of toughened blends of poly(lactic acid)(PLA) and poly(butylene adipate-co-terephthalate)(PBAT) for 3D printing applications: Compatibilization methods and material performance evaluation". ACS Sustainable Chemistry & Engineering, 8(17), 6576–6589. |
J378 | Li, Z., Reimer, C., Picard, M., Mohanty, A.K., & Misra, M. (2020). "Characterization of chicken feather biocarbon for use in sustainable biocomposites". Frontiers – Materials, 7, 3. |
J377 | Tadele, D., Roy, P., Defersha, F., Misra, M., & Mohanty, A.K. (2020). “A comparative life cycle assessment of talc and biochar reinforced composites for light-weight automotive parts”. Clean Technologies and Environmental Policy, 22(3), 639-649. |
J376 | Reimer, C., Snowdon, M. R., Vivekanandhan, S., You, X., Misra, M., Gregori, S., Mielewski, D & Mohanty, A. K. (2020). "Synthesis and characterization of novel nitrogen doped biocarbons from distillers dried grains with solubles (DDGS) for supercapacitor applications". Bioresource Technology Reports, 9, 100375. |
J375 | Snowdon, M., Abdelwahab, M., Misra, M., & Mohanty, A.K. (2020). "Mechanical optimization of virgin and recycled poly(ethylene terephthalate) biocomposites with sustainable biocarbon through a factorial design". Results in Materials, 5, 100060. |
J374 | Abdelwahab, M., Codou, A., Anstey, A., Mohanty, A.K., & Misra, M. (2020). "Studies on the dimensional stability and mechanical properties of nanobiocomposites from polyamide 6-filled with biocarbon and nanoclay hybrid systems". Composites Part A, 129, 105695. |
J373 | Cisneros-López, E. O., Pal, A. K., Rodriguez-Uribe, A., Wu, F., Misra, M., Mielewski, D. F., Kiziltas, A., & Mohanty, A. K. (2020). "Recycled poly(lactic acid)-based 3D printed sustainable biocomposites: A comparative study with injection molding". Materials Today Sustainability, 7, 100027. |
J372 | Codou, A., Misra, M., & Mohanty, A.K. (2020). "Sustainable biocomposites from nylon 6 and polypropylene blends and biocarbon - Studies on tailored morphologies and complex composite structures". Composites Part A, 129, 105680. |
J371 | Jubinville, D., Abdelwahab, M, Misra, M., & Mohanty, A.K. (2020). "Comparison in composite performance after thermooxidative aging of injection molded polyamide 6 with glass fiber, talc, and a sustainable biocarbon filler". Journal of Applied Polymer Science, 137, 48618. |
2019 | |
J370 | Pin, J. M., Misra, M., & Mohanty, A. K. (2019). "Cross‐linkable liquid‐crystalline biopolyesteramide as a multifunctional polymeric platform designed from corn oil side‐stream product of bioethanol industry". Macromolecular rapid communications, 40(13), 1900093. |
J369 | Abdelwahab, M.,Rodriguez-Uribe, A., Misra, M., & Mohanty, A.K. (2019). "Injection molded novel biocomposites from polypropylene and sustainable biocarbon". Molecules, 24(22), 4026. |
J368 | Cooper, C. J., Abdelwahab, M., Mohanty, A.K., & Misra, M. (2019). "Hybrid green bionanocomposites of bio-based poly(butylene succinate) reinforced with pyrolyzed perennial grass microparticles and graphene nanoplatelets". ACS Omega, 4(24), 20476-20485. |
J367 | Diederichs, E, Picard, M., Chang, B. P., Misra, M., Mielewski, D., & Mohanty, A.K. (2019). "Strategy to improve printability of renewable resource based engineering plastic tailored for FDM applications". ACS Omega, 4(23), 20297-20307. |
J366 | Thakur, S., Cisneros-Lopez, E. O., Pin, J. M., Misra, M., & Mohanty, A. K. (2019). "Green toughness modifier from downstream corn oil in improving poly(lactic acid) performance". ACS Applied Polymer Materials, 1(12), 3396-3406. |
J365 | Chang, B. P., Thakur, S., Mohanty, A. K., & Misra, M. (2019). "Novel sustainable biobased flame retardant from functionalized vegetable oil for enhanced flame retardancy of engineering plastic". Scientific reports, 9(1), 1-14. |
J364 | Gowman, A.C., Picard, M.C., Lim, L-T, Misra, M. & Mohanty, A.K. (2019). "Fruit waste valorization for biodegradable biocomposite applications: A review". BioResources, 14(4),10047-10092. |
J363 | Wu, F., Misra, M., & Mohanty, A. K. (2019). "Studies on why the heat deflection temperature of polylactide bioplastic cannot be improved by overcrosslinking". Polymer Crystallization, 2(6), e10088. |
J362 | Hariram, M., Vivekanandhan, S., Ganesan, V., Muthuramkumar, S., Rodriguez-Uribe, A., Mohanty, A.K., & Misra, M. (2019). "Tecoma stans flower extract assisted biogenic synthesis of functional Ag-Talc nanostructures for antimicrobial applications". Bioresource Technology Reports, 7, 100298. |
J361 | Tadele, D., Roy, P., Defersha, F., Misra, M., & Mohanty, A.K. (2019). "Life cycle assessment of renewable filler material (biochar) produced from perennial grass (Miscanthus)". AIMS Energy, 7(4),430-440. |
J360 | Roy, P., Tadele, D., Defersha, F., Misra, M., & Mohanty, A.K. (2019). "Environmental and economic prospects of biomaterials in the automotive industry". Clean Technologies and Environmental Policy, 21(8), 1535–1548. |
J359 | Qahtani, M., Wu, F., Misra, M., Stefano, G., Mielewski, D., & Mohanty, A.K. (2019). "Experimental design of sustainable 3D printed poly(lactic acid) (PLA)/biobased poly(butylene succinate) (BioPBS) blends via fused deposition modelling". ACS Sustainable Chemistry & Engineering, 7(17), 14460-14470. |
J358 | Jubinville, D., Chang, B. P., Pin, J.-M., Mohanty, A. K. & Misra, M. (2019). "Synergistic thermo-oxidative maleation of PA11 as compatibilization strategy for PA6 and PBT blend". Polymer, 179, 121594. |
J357 | Wu, F., Misra, M., & Mohanty, A. K. (2019). "Rheological monitoring of chemical gelation of biodegradable poly(butylene succinate): Importance of peroxide concentration and temperature in reactive extrusion". ACS Applied Polymer Materials,1(6),1604-1612. |
J356 | Pin, J-M., Misra, M., & Mohanty, A.K. (2019). "Crosslinkable liquid-crystalline biopolyesteramide as a multifunctional polymeric platform designed from corn oil side-stream product of bioethanol industry". Macromolecular Rapid Communications, 40(13), 1900093. |
J355 | Ogunsona, E.O., Codou, A., Misra, M., & Mohanty, A.K. (2019). "A critical review on the fabrication processes and performance of polyamide biocomposites from a biofiller perspective". Materials Today Sustainability, 5, 100014. |
J354 | Thakur, S., Misra, M., & Mohanty, A.K. (2019). "Sustainable hydrophobic and moisture resistant coating derived from downstream corn oil". ACS Sustainable Chemistry & Engineering, 7(9), 8766-8774. |
J353 | Chang, B.P., Misra, M. & Mohanty, A.K. (2019). "Sustainable biocarbon as an alternative of traditional-fillers for poly(butylene terephthalate)-based composites: Thermo-oxidative aging and durability". Journal of Applied Polymer Science, 136(27), 47722. |
J352 | Demiroğlu Mustafov, S., Mohanty, A.K., Misra, M., & Seydibeyoğlu, M. Ö. (2019). "Fabrication of conductive lignin/PAN carbon nanofiber with enhanced graphene for the modified electrod". Carbon,147, 262-275. |
J351 | Abdelwahab, M, Misra, M, & Mohanty, A.K. (2019). "Injection molded biocomposites from polypropylene and lignin: Effect of compatibilizers on interfacial adhesion and performance". Industrial Crops and Products, 132, 497-510. |
J350 | Snowdon, M.R., Wu, F., Mohanty, A.K. & Misra, M. (2019). "Comparative study of extrinsic properties of poly(lactic acid)-based biocomposites filled with talc versus sustainable biocarbon". RSC Advances, 9, 6752 - 6761. |
J349 | Gowman, A.C., Picard, M.C., Rodriguez-Uribe, A., Misra, M., Khalil, H., Thimmanagari, M., & Mohanty, A.K.(2019). "Physicochemical analysis of apple and grape pomaces". BioResources,14(2), 3210-3230. |
J348 | Picard, M., Thakur, S., Misra, M., & Mohanty, A.K. (2019). "Miscanthus grass derived carbon dots to selectively detect Fe³+ ions". RSC Advances, 9, 8628-8637. |
J347 | Picard, M., Rodriguez-Uribe, A., Thimmanagari, M., Misra, M., & Mohanty, A.K. (2020). "Sustainable biocomposites from poly(butylene succinate) and apple pomace: Analysis of performance compatibilization". Waste and Biomass Valorization, 11(7), 3775-3787. |
J346 | Zarrinbakhsh, N., Mohanty, A.K., & Misra, M. (2019). "Formulation optimization of bioreinforced composites from polyolefins and dried distillers' grains using statistical methods". Composites Part A,119, 246-260. https://doi.org/10.1016/j.compositesa.2019.01.017Get rights and content |
J345 | Sánchez-Acosta, D., Rodriguez-Uribe, A., Álvarez-Chávez, C.R., Mohanty, A.K., Misra, M., J. López-Cervantes, J., & Madera-Santana,T.J. (2019). "Physicochemical characterization and evaluation of pecan nutshell as biofiller in a matrix of poly(lactic acid)". Journal of Polymers and the Environment, 27(3), 521-532. |
J344 | Gitari, B., Chang, B. P., Misra, M., Navabi, A., & Mohanty, A. K. (2019). "A comparative study on the mechanical, thermal, and water barrier properties of PLA nanocomposite films prepared with bacterial nanocellulose and cellulose nanofibrils". BioResource,14(1), 1867-1889. |
J343 | Wu, F., Misra, M., & Mohanty, A.K. (2019). "Novel tunable super-tough material from biodegradable polymer blends: Nano-structuring through reactive extrusion". RSC Advances, 9, 2836-2847. |
J342 | Wu, F., Misra, M., & Mohanty, A.K. (2019). "Super toughened poly(lactic acid) (PLA)-based reactive ternary blends via enhancing interfacial compatibility". ACS Omega, 4(1), 1955 –1968. |
2018 | |
J341 | Mohanty, A. K., Vivekanandhan, S., Pin, J. M., & Misra, M. (2018). "Composites from renewable and sustainable resources: Challenges and innovations". Science, 362(6414), 536-542. |
J340 | Gowman, A., Wang, T., Rodriguez-Uribe, A., Mohanty, A.K., & Misra, M. (2018). "Bio-poly(butylene succinate) and its composites with grape pomace: Mechanical performance and thermal properties". ACS Omega, 3(9), 15205–15216. |
J339 | You, X., Snowdon, M. R., Misra, M., & Mohanty, A. K. (2018). "Biobased poly(ethylene terephthalate)/poly(lactic acid) blends tailored with epoxide compatibilizers". ACS Omega, 3(9), 11759 -11769. **Chosen for the ACS OMEGA publication in the Open Access Virtual Issue “Celebrating 5 Years of Open Access with ACS Omega” (2020) |
J338 | Nakayama, D., Wu, F., Mohanty, A. K., Hirai, S., & Misra, M. (2018). "Biodegradable composites developed from PBAT/PLA binary blends and silk powder: Compatibilization and performance evaluation". ACS Omega, 3(10), 12412-12421. |
J337 | Chang, B.P., Mohanty, A.K., & Misra, M. (2018). "Tuning the compatibility to achieve toughened biobased poly(lactic acid)/poly(butylene terephthalate) blends". RSC Advances, 8, 27709 - 27724. |
J336 | Quosai, P., Anstey, A., Mohanty, A. K., & Misra, M. (2018). "Characterization of biocarbon generated by high-and low-temperature pyrolysis of soy hulls and coffee chaff: For polymer composite applications". Royal Society open science, 5(8), 171970. |
J335 | Snowdon, M, Mohanty, A.K., & Misra, M. (2018). "Effect of compatibilization on biobased rubber-toughened poly(trimethylene terephthalate): Miscibility, morphology, and mechanical properties". ACS Omega, 3(7), 7300 –7309. |
J334 | Codou, A., Misra, M., & Mohanty, A. K. (2018). "Sustainable biocarbon reinforced nylon 6/ polypropylene compatibilized blends: Effect of particle size and morphology on performance of the biocomposites". Composites Part A: Applied Science and Manufacturing, 112, 1-10. |
J333 | Cooper, C. J., Mohanty, A. K., & Misra, M. (2018). "Electrospinning process and structure relationship of biobased poly(butylene succinate) for nanoporous fibers". ACS Omega, 3(5), 5547-5557. |
J332 | Codou, A., Anstey, A., Misra, M., & Mohanty, A. K. (2018). "Novel compatibilized nylon-based ternary blends with polypropylene and poly (lactic acid): Morphology evolution and rheological behaviour". RSC Advances, 8(28), 15709-15724. |
J331 | Ogunsona, E. O., Codou, A., Misra, M., & Mohanty, A. K. (2018). "Thermally stable pyrolytic biocarbon as an effective and sustainable reinforcing filler for polyamide bio-composites fabrication". Journal of Polymer and the Environment, 26(9), 3574–3589. |
J330 | Pin, J.-M, Behazin, E., Misra, M., & Mohanty, A.K. (2018). "Stereodynamic insight of the thermal history effect on poly(vinyl chloride) calorimetric sub-glass and glass transitions as fragile glass model". Physical Chemistry Chemical Physics, 20(24), 16333-16346. |
J329 | Valerio, O., Misra, M., & Mohanty, A. K. (2018). "Poly(glycerol-co-diacids) polyesters: From glycerol biorefinery to sustainable engineering applications, A review". ACS Sustainable Chemistry & Engineering, 6(5), 5681-5693. |
J328 | Benwood, C., Anstey, A., Andrzejewski, J., Misra, M., & Mohanty, A. K. (2018). "Improving the impact strength and heat resistance of 3D printed models: Structure, property, and processing correlationships during fused deposition modeling (FDM) of poly(Lactic Acid)". ACS Omega, 3(4), 4400-4411. https://doi.org/10.1021/acsomega.8b00129 **Chosen for the ACS OMEGA publication in the Open Access Virtual Issue “Women at the Forefront of Chemistry” (2020) |
J327 | Wang, T., Rodriguez-Uribe, A., Misra, M., & Mohanty, A. K. (2018). "Sustainable carbonaceous biofiller from Miscanthus: Size reduction, characterization, and potential bio-composites applications". BioResources, 13(2), 3720-3739. |
J326 | Andrzejewski, J., Misra, M., & Mohanty, A. K. (2018). "Polycarbonate biocomposites reinforced with a hybrid filler system of recycled carbon fiber and biocarbon: Preparation and thermomechanical characterization". Journal of Applied Polymer Science, 135(28), 46449. |
J325 | Major, I., Pin, J. M., Behazin, E., Rodriguez-Uribe, A., Misra, M., & Mohanty, A. (2018). "Graphitization of Miscanthus grass biocarbon enhanced by in situ generated FeCo nanoparticles". Green Chemistry, 20(10), 2269-2278. |
J324 | Brown, E., Abdelwahab, M., Valerio, O., Misra, M., & Mohanty, A. K. (2018). "In situ cellulose nanocrystal-reinforced glycerol-based biopolyester for enhancing poly(lactic acid) biocomposites". ACS Omega, 3(4), 3857-3867. |
J323 | Codou, A., Misra, M., & Mohanty, A. K. (2018). "Understanding the morphology formation and properties of polyamide 6 and bio‐based poly (trimethylene terephthalate) blends". Polymer Engineering & Science, 58(12), 2210-2218. |
J322 | Vishnukumara, P., Vivekanandhana, S., Misra, M., & Mohanty, A. K. (2018). "Recent advances and emerging opportunities in phytochemical synthesis of ZnO nanostructures". Materials Science in Semiconductor Processing, 80(15), 143-161. |
J321 | Anstey, A., Codou, A., Misra, M., & Mohanty, A. K. (2018). "Novel compatibilized nylon-based ternary blends with polypropylene and poly(lactic acid): Fractionated crystallization phenomena and mechanical performance". ACS Omega, 3(3), 2845-2854. |
J320 | Valerio, O., Misra, M., & Mohanty, A. K. (2018). "Statistical design of sustainable thermoplastic blends of poly(glycerol succinate-co-maleate) (PGSMA), poly(lactic acid) (PLA) and poly(butylene succinate) (PBS)". Polymer Testing, 65, 420-428. |
J319 | Behazin, E., Rodriguez-Uribe, A., Misra, M., & Mohanty, A. K. (2018). "Long-term performance of β-nucleated toughened polypropylene-biocarbon composites". Composites Part A: Applied Science and Manufacturing, 105, 274-280. |
J318 | Arnold, S., Rodriguez-Uribe, A., Misra, M., & Mohanty, A. K. (2018). "Slow pyrolysis of bio-oil and studies on chemical and physical properties of the resulting new bio-carbon". Journal of Cleaner Production, 172(20), 2748-2758. |
J317 | Biancaniello, M., Wang, T., Misra, M., & Mohanty, A. K. (2018). "Plywood adhesives derived from distillers' dried grains with solubles (DDGS) incorporating 2-hydroxyethyl acrylate". Journal of Applied Polymer Science, 135(6), 45689. |
J316 | Muthuraj, R., Misra, M. & Mohanty, A. K. (2018). "Biodegradable compatibilized polymer blends for packaging applications: A literature review". Journal of Applied Polymer Science, 135(24), 45726. |
J315 | Valerio, O., Misra, M., & Mohanty, A. K. (2018). "Improvement of impact toughness of biodegradable poly(butylene succinate) by melt blending with sustainable biobased glycerol elastomers". Journal of Polymers and the Environment, 26(3), 1078-1087. |
2017 | |
J314 | Adams, B., Abdelwahab, M., Misra, M., & Mohanty, A. K. (2017). "Injection-molded bioblends from lignin and biodegradable polymers: Processing and performance evaluation". Journal of Polymers and the Environment, 26(6), 2360-2373. |
J313 | You, X., Misra, M., Gregori, S., & Mohanty, A. K. (2017). "Preparation of an electric double layer capacitor (EDLC) using Miscanthus-derived biocarbon". ACS Sustainable Chem. Eng., 6(1), 318-324. |
J312 | Snowdon, M. R., Mohanty, A. K., & Misra, M. (2017). "Miscibility and performance evaluation of biocomposites made from polypropylene/poly(lactic acid)/Poly(hydroxybutyrate-co-hydroxyvalerate) with a sustainable biocarbon filler". ACS Omega, 2(10), 6446-6454. |
J311 | Mashouf Roudsari, G., Mohanty, A. K., & Misra, M. (2017). "Green approaches to engineer tough biobased epoxies: A review". ACS Sustainable Chemistry & Engineering, 5(11), 9528-9541. |
J310 | Valerio, O., Misra, M., & Mohanty, A. K. (2017). "Sustainable biobased blends of poly(lactic acid)(PLA) and poly(glycerol succinate-co-maleate)(PGSMA) with balanced performance prepared by dynamic vulcanization". RSC Advances, 7(61), 38594-38603. |
J309 | Muthuraj, R., Misra, M. and Mohanty, A. K. (2017). "Biodegradable biocomposites from poly(butylene adipate-co-terephthalate) and Miscanthus: Preparation, compatibilization, and performance evaluation". Journal of Applied Polymer Science, 134(43), 45448. |
J308 | Behazin, E., Misra, M., and Mohanty, A.K. (2017). "Compatibilization of toughened polypropylene/biocarbon biocomposites: A full factorial design optimization of mechanical properties". Polymer Testing, 61, 364-372. |
J307 | Mashouf Roudsari, G., Mohanty, A. K. and Misra, M. (2017). "A statistical approach to develop biocomposites from epoxy resin, poly(furfuryl alcohol), poly(propylene carbonate), and biochar". Journal of Applied Polymer Science, 134, 45307. |
J306 | Behazin, E., Misra, M., & Mohanty, A. K. (2017). "Sustainable biocomposites from pyrolyzed grass and toughened polypropylene: Structure–property relationships". ACS Omega, 2(5), 2191-2199. |
J305 | Yuryev, Y., Mohanty, A. K., & Misra, M. (2017). "Novel biocomposites from biobased PC/PLA blend matrix system for durable applications". Composites Part B: Engineering, 130(1), 158-166. |
J304 | Snowdon, M. R., Mohanty, A. K., & Misra, M. (2017). "Examination of a biobased carbon nucleating agent on poly(lactic acid) crystallization". Journal of Renewable Materials, 5(1), 94-105. |
J303 | Muthuraj, R., Misra, M., & Mohanty, A. K. (2017). "Biocomposite consisting of Miscanthus fiber and biodegradable binary blend matrix: Compatibilization and performance evaluation". RSC Advances, 7(44), 27538-27548. |
J302 | Ogunsona, E., Misra, M., & Mohanty, A. K. (2017). "Accelerated hydrothermal aging of biocarbon reinforced nylon biocomposites". Polymer Degradation and Stability,139, 76-88. |
J301 | Pin, J., Misra, M., & Mohanty, A. (2017). "Green design of nanoporous materials and carbonaceous foams from polyfurfuryl alcohol and epoxidized linseed oil". Materials Letters,196, 238-241. |
J300 | Ogunsona, E., Misra, M., & Mohanty, A. (2017). "Impact of interfacial adhesion on the microstructure and property variations of biocarbons reinforced nylon 6 biocomposites". Composites Part A: Applied Science and Manufacturing, 98, 32-44. |
J299 | Behazin, E., Mohanty, A. K., & Misra, M. (2017). "Sustainable biocarbon from pyrolyzed perennial grasses and their effects on impact modified polypropylene biocomposites". Composites Part B: Engineering,118, 116-124. |
J298 | Nagarajan, V., Mohanty, A. K. and Misra, M. (2017). "Blends of polylactic acid with thermoplastic copolyester elastomer: Effect of functionalized terpolymer type on reactive toughening". Polymer Engineering & Science, 58(3), 280-290. |
J297 | Mashouf Roudsari, G., Mohanty, A. K., & Misra, M. (2017). "Exploring the effect of poly(propylene carbonate) polyol in biobased epoxy interpenetrating network". ACS Omega, 2(2), 611-617. https://doi.org/10.1021/acsomega.6b00458 **Featured in ACS Publications Open Access Virtual Issue Called "Hot Materials in a Cool Country" in celebration of the 100th Meeting of the Canadian Chemistry Conference (2017). |
J296 | Muthuraj, R., Misra, M., & Mohanty, A. K. (2017). "Reactive compatibilization and performance evaluation of miscanthus biofiber reinforced poly(hydroxybutyrate-co-hydroxyvalerate) biocomposites". Journal of Applied Polymer Science, 134(21), 44860. |
J295 | Ogunsona, E. O., Misra, M., & Mohanty, A. K. (2017). "Influence of epoxidized natural rubber on the phase structure and toughening behavior of biocarbon reinforced nylon 6 biocomposites". RSC Advances, 7(15), 8727-8739. |
J294 | Pin, J. M., Valerio, O., Misra, M., & Mohanty, A. (2017). "Impact of butyl glycidyl ether comonomer on poly(glycerol–succinate) architecture and dynamics for multifunctional hyperbranched polymer design". Macromolecules, 50(3), 732-745. |
J293 | Enriquez, E., Mohanty, A. K., & Misra, M. (2017). "Biobased blends of poly(propylene carbonate) and poly(hydroxybutyrate‐co‐hydroxyvalerate): Fabrication and characterization". Journal of Applied Polymer Science,134(5). |
J292 | Ogunsona, E. O., Misra, M., & Mohanty, A. K. (2017). "Sustainable biocomposites from biobased polyamide 6, 10 and biocarbon from pyrolyzed miscanthus fibers". Journal of Applied Polymer Science,134(4). |
J291 | Mashouf Roudsari, G., Misra, M., & Mohanty, A. K. (2017). "A study of mechanical properties of biobased epoxy network: Effect of addition of epoxidized soybean oil and poly (furfuryl alcohol)". Journal of Applied Polymer Science, 134(1). |
J290 | Vadori, R., Misra, M., & Mohanty, A. K. (2017). "Statistical optimization of compatibilized blends of poly (lactic acid) and acrylonitrile butadiene styrene". Journal of Applied Polymer Science,134(9). |
2016 | |
J289 | Valerio, O., Pin, J. M., Misra, M., & Mohanty, A. K. (2016). "Synthesis of glycerol-based biopolyesters as toughness enhancers for polylactic acid bioplastic through reactive extrusion". ACS Omega, 1(6), 1284-1295. |
J288 | Nagarajan, V., Mohanty, A. K., & Misra, M. (2016). "Biocomposites with size-fractionated biocarbon: Influence of the microstructure on macroscopic properties". ACS Omega,1(4), 636-647. |
J287 | Yuryev, Y., Mohanty, A. K., & Misra, M. (2016). "Novel super-toughened bio-based blend from polycarbonate and poly(lactic acid) for durable applications". RSC Advances, 6(107), 105094-105104. |
J286 | Poursorkhabi, V., Mohanty, A. K., & Misra, M. (2016). "Statistical analysis of the effects of carbonization parameters on the structure of carbonized electrospun organosolv lignin fibers". Journal of Applied Polymer Science,133(45). |
J285 | Nagarajan, V., Mohanty, A. K., & Misra, M. (2016). "Reactive compatibilization of poly trimethylene terephthalate (PTT) and polylactic acid (PLA) using terpolymer: Factorial design optimization of mechanical properties". Materials & Design, 110, 581-591. |
J284 | Yuryev, Y., Mohanty, A. K., & Misra, M. (2016). "A new approach to supertough poly(lactic acid): A high temperature reactive blending". Macromolecular Materials and Engineering, 301(12), 1443-1453. |
J283 | Henke, L., Zarrinbakhsh, N., Endres, H. J., Misra, M., & Mohanty, A. K. (2017). "Biodegradable and bio-based green blends from carbon dioxide-derived bioplastic and poly (butylene succinate)". Journal of Polymers and the Environment, 25(2), 499-509. |
J282 | Vivekanandhan, S., Schreiber, M., Muthuramkumar, S., Misra, M., & Mohanty, A. K. (2016). "Carbon nanotubes from renewable feedstocks: A move toward sustainable nanofabrication". Journal of Applied Polymer Science, 134(4), 44255. |
J281 | Zarrinbakhsh, N., Wang, T., Rodriguez-Uribe, A., Misra, M., & Mohanty, A. K. (2016). "Characterization of wastes and coproducts from the coffee industry for composite material production". BioResources, 11(3), 7637-7653. |
J280 | Yuryev, Y., Mohanty, A. K., & Misra, M. (2016). "Hydrolytic stability of polycarbonate/poly(lactic acid) blends and its evaluation via poly(lactic) acid median melting point depression". Polymer Degradation and Stability, 134, 227-236. |
J279 | Sun, Q., Mekonnen, T., Misra, M., & Mohanty, A. K. (2016). "Novel biodegradable cast film from carbon dioxide based copolymer and poly(lactic acid)". Journal of Polymers and the Environment, 24(1), 23-36. |
J278 | Coativy, G., Misra, M., & Mohanty, A. K. (2016). "Synthesis of shape memory poly(glycerol sebacate) - Stearate polymer". Macromolecular Materials and Engineering, 302(2), 1600294. |
J277 | Enriquez, E., Mohanty, A. K., & Misra, M. (2016). "Alkali and peroxide bleach treatments on spring harvested switchgrass for potential composite application". BioResources, 11(4), 9922-9939. |
J276 | Zafar, M. T., Zarrinbakhsh, N., Mohanty, A. K., Misra, M., Maiti, S. N., & Ghosh, A. K. (2016). "Biocomposites based on poly(lactic acid)/willow-fiber and their injection moulded microcellular foams". Express Polymer Letters,10(2). |
J275 | Vadori, R., Misra, M., & Mohanty, A. K. (2016). "Sustainable biobased blends from the reactive extrusion of polylactide and acrylonitrile butadiene styrene". Journal of Applied Polymer Science, 133(45). |
J274 | Coativy, G., Misra, M., & Mohanty, A. K. (2016). "Microwave synthesis and melt blending of glycerol based toughening agent with poly (lactic acid)". ACS Sustainable Chemistry & Engineering, 4(4), 2142-2149. |
J273 | Nagarajan, V., Mohanty, A. K., & Misra, M. (2016). "Crystallization behavior and morphology of polylactic acid (PLA) with aromatic sulfonate derivative". Journal of Applied Polymer Science, 133(28). |
J272 | Nagarajan, V., Mohanty, A. K., & Misra, M. (2016). "Perspective on polylactic acid (PLA) based sustainable materials for durable applications: Focus on toughness and heat resistance". ACS Sustainable Chemistry & Engineering, 4(6), 2899-2916. https://doi.org/10.1021/acssuschemeng.6b00321 **Featured in ACS Publications Open Access Virtual Issue Called "Hot Materials in a Cool Country" in celebration of the 100th Meeting of the Canadian Chemistry Conference (2017). |
J271 | Abboud, Z., Vivekanandhan, S., Misra, M., & Mohanty, A. K. (2016). "Leaf extract mediated biogenic process for the decoration of graphene with silver nanoparticles". Materials Letters, 178, 115-119. |
J270 | Behazin, E., Ogunsona, E., Rodriguez-Uribe, A., Mohanty, A. K., Misra, M., and Anyia, A. O. (2016). "Mechanical, chemical, and physical properties of wood and perennial grass biochars for possible composite application". BioRes,11(1), 1334-1348. |
J269 | Anstey, A., Vivekanandhan, S., Rodriguez-Uribe, A., Misra, M., & Mohanty, A. K. (2016). "Oxidative acid treatment and characterization of new biocarbon from sustainable Miscanthus biomass". Science of The Total Environment, 550, 241-247. |
J268 | Enriquez, E., Mohanty, A. K., & Misra, M. (2016). "Biobased polymer blends of poly(trimethylene terephthalate) and high density polyethylene". Materials & Design, 90, 984-990. |
J267 | Muthuraj, R., Misra, M., Defersha, F., & Mohanty, A. K. (2016). "Influence of processing parameters on the impact strength of biocomposites: A statistical approach". Composites Part A: Applied Science and Manufacturing, 83, 120-129. |
J266 | Mekonnen, T., Misra, M., & Mohanty, A. K. (2016). "Fermented soymeals and their reactive blends with poly(butylene adipate-co-terephthalate) in engineering biodegradable cast films for sustainable packaging". ACS Sustainable Chemistry & Engineering, 4(3), 782-793. |
2015 | |
J265 | Abdelwahab, M. A., Misra, M., & Mohanty, A. K. (2015). "Epoxidized pine oil - siloxane: Crosslinking kinetic study and thermomechanical properties". Journal of Applied Polymer Science, 132(37). |
J264 | Deka, H., Wang, T., Mohanty, A. K., & Misra, M. (2015). "Novel biocomposites from biobased epoxy and corn-based distillers dried grains (DDG)". Journal of Polymers and the Environment, 23(4), 425-436. |
J263 | Muthuraj, R., Misra, M., & Mohanty, A. K. (2015). "Injection molded sustainable biocomposites from poly(butylene succinate) bioplastic and perennial grass". ACS Sustainable Chemistry & Engineering, 3(11), 2767-2776. |
J262 | Valerio, O., Horvath, T., Pond, C., Misra, M., & Mohanty, A. (2015). "Improved utilization of crude glycerol from biodiesel industries: Synthesis and characterization of sustainable biobased polyesters". Industrial Crops and Products, 78, 141-147. |
J261 | Myllytie, P., Misra, M., & Mohanty, A. K. (2015). "Carbonized lignin as sustainable filler in biobased poly(trimethylene terephthalate) polymer for injection molding applications". ACS Sustainable Chemistry & Engineering, 4(1), 102-110. |
J260 | Vadori, R., Misra, M., & Mohanty, A. K. (2015). "Studies on the reaction of acrylonitrile butadiene styrene to melt processing conditions". Macromolecular Materials and Engineering, 300(7), 750-757. |
J259 | Abdelwahab, M. A., Taylor, S., Misra, M., & Mohanty, A. K. (2015). "Thermo-mechanical characterization of bioblends from polylactide and poly(butylene adipate-terephthalate) and lignin". Macromolecular Materials and Engineering, 300(3), 299-311. |
J258 | Nagarajan, V., Zhang, K., Misra, M., & Mohanty, A. K. (2015). "Overcoming the fundamental challenges in improving the impact strength and crystallinity of PLA biocomposites: Influence of nucleating agent and mold temperature". ACS applied materials & interfaces, 7(21), 11203-11214. |
J257 | Muthuraj, R., Misra, M., & Mohanty, A. K. (2015). "Hydrolytic degradation of biodegradable polyesters under simulated environmental conditions". Journal of Applied Polymer Science, 132(27). |
J256 | Torres, S., Navia, R., Campbell Murdy, R., Cooke, P., Misra, M., & Mohanty, A. K. (2015). "Green composites from residual microalgae biomass and poly(butylene adipate-co-terephthalate): Processing and plasticization". ACS Sustainable Chemistry & Engineering, 3(4), 614 - 624. |
J255 | Vivekanandhan, S., Misra, M., & Mohanty, A. K. (2015). "Microscopic, structural, and electrical characterization of the carbonaceous materials synthesized from various lignin feedstocks". Journal of Applied Polymer Science, 132(15). |
J254 | Zaverl, M., Valerio, O., Misra, M., & Mohanty, A. (2015). "Study of the effect of processing conditions on the co-injection of PBS/PBAT and PTT/PBT blends for parts with increased bio-content". Journal of Applied Polymer Science, 132(2). |
J253 | Snowdon, M., Mohanty, A. K., & Misra, M. (2015). "Melt processing and characterization of bionanocomposites made from poly(butylene succinate) bioplastic and carbon black". Macromolecular Materials and Engineering, 300(1), 118-126. |
J252 | Poursorkhabi, V., Mohanty, A. K., & Misra, M. (2015). "Electrospinning of aqueous lignin/poly(ethylene oxide) complexes". Journal of Applied Polymer Science, 132(2). |
J251 | Vivekanandhan, S., Venkateswarlu, M., Rawls, H. R., Misra, M., Mohanty, A. K., & Satyanarayana, N. (2015). "Synthesis and characterization of AgNP:ZrO2 functional nanomaterials by leaf extract assisted bioreduction process". Ceramics International, 41(2), 3305-3311. |
2014 | |
J250 | Zarrinbakhsh, N., Defersha, F. M., Mohanty, A. K., & Misra, M. (2014). "A statistical approach to engineer a biocomposite formulation from biofuel coproduct with balanced properties". Journal of Applied Polymer Science,131(13). |
J249 | Snowdon, M. R., Mohanty, A. K., & Misra, M. (2014). "A study of carbonized lignin as an alternative to carbon black". ACS Sustainable Chemistry & Engineering, 2(5), 1257-1263. |
J248 | Wagner, A., Poursorkhabi, V., Mohanty, A. K., & Misra, M. (2014). "Analysis of porous electrospun fibers from poly(L-lactic acid)/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) blends". ACS Sustainable Chemistry & Engineering, 2(8), 1976-1982. |
J247 | Sahoo, S., Misra, M., & Mohanty, A. K. (2014). "Biocomposites from switchgrass and lignin hybrid and poly (butylene succinate) bioplastic: Studies on reactive compatibilization and performance evaluation". Macromolecular Materials and Engineering, 299(2), 178-189. |
J246 | Reddy, M. M., Misra, M., & Mohanty, A. K. (2014). "Biodegradable blends from corn gluten meal and poly(butylene adipate-co-terephthalate)(PBAT): Studies on the influence of plasticization and destructurization on rheology, tensile properties and interfacial interactions". Journal of Polymers and the Environment, 22(2), 167-175. |
J245 | Muthuraj, R., Misra, M., & Mohanty, A. K. (2014). "Biodegradable poly(butylene succinate) and poly(butylene adipate-co-terephthalate) blends: Reactive extrusion and performance evaluation". Journal of Polymers and the Environment, 22(3), 336-349. |
J244 | Zhang, K., Nagarajan, V., Zarrinbakhsh, N., Mohanty, A. K., & Misra, M. (2014). "Co-injection molded new green composites from biodegradable polyesters and miscanthus fibers". Macromolecular Materials and Engineering, 299(4), 436-446. |
J243 | Smyth, M., Poursorkhabi, V., Mohanty, A. K., Gregori, S., & Misra, M. (2014). "Electrospinning highly oriented and crystalline poly (lactic acid) fiber mats". Journal of Materials Science, 49(6), 2430-2441. |
J242 | Vivekanandhan, S., Schreiber, M., Mason, C., Mohanty, A. K., & Misra, M. (2014). "Maple leaf (Acer sp.) extract mediated green process for the functionalization of ZnO powders with silver nanoparticles". Colloids and Surfaces B: Biointerfaces, 113, 169-175. |
J241 | Huber, T., Misra, M., & Mohanty, A. K. (2014). "Mechanical properties of compatibilized nylon 6/polypropylene blends; studies of the interfacial behavior through an emulsion model". Journal of Applied Polymer Science,131(18). |
J240 | Anstey, A., Muniyasamy, S., Reddy, M. M., Misra, M., & Mohanty, A. (2014). "Processability and biodegradability evaluation of composites from poly (butylene succinate)(PBS) bioplastic and biofuel co-products from Ontario". Journal of Polymers and the Environment, 22(2), 209-218. |
J239 | Deka, H., Mohanty, A., & Misra, M. (2014). "Renewable resource based green blends from poly(furfuryl alcohol) bioresin and lignin". Macromolecular Materials and Engineering, 299(5), 552-559. |
J238 | Mashouf Roudsari, G., Mohanty, A. K., & Misra, M. (2014). "Study of the curing kinetics of epoxy resins with biobased hardener and epoxidized soybean oil". ACS Sustainable Chem. Eng, 2, 2111-2116. |
J237 | Zhang, K., Misra, M., & Mohanty, A. K. (2014). "Toughened sustainable green composites from poly(3-hydroxybutyrate-co-3-hydroxyvalerate) based ternary blends and Miscanthus biofiber". ACS Sustainable Chemistry & Engineering, 2(10), 2345-2354. |
J236 | Zhang, K., Nagarajan, V., Misra, M., & Mohanty, A. K. (2014). "Supertoughened renewable PLA reactive multiphase blends system: phase morphology and performance". ACS applied materials & interfaces, 6(15), 12436-12448. |
J235 | Schreiber, M., Vivekanandhan, S., Mohanty, A. K., & Misra, M. (2014). "Iodine treatment of lignin cellulose acetate electrospun fibers: Enhancement of green fiber carbonization". ACS Sustainable Chemistry & Engineering, 3(1), 33-41. |
J234 | Zarrinbakhsh, N., Mohanty, A. K., Fraser, E., Hayward, G., & Misra, M. (2014). "Novel materials from distillers' grains: A new window for a sustainable bioethanol industry". Journal of Biobased Materials and Bioenergy, 8(4), 387-402. |
J233 | Schreiber, M., Vivekanandhan, S., Cooke, P., Mohanty, A. K., & Misra, M. (2014). "Electrospun green fibres from lignin and chitosan: A novel polycomplexation process for the production of lignin-based fibres". Journal of Materials Science, 49(23), 7949-7958. |
J232 | Chen, R., Abdelwahab, M. A., Misra, M., & Mohanty, A. K. (2014). "Biobased ternary blends of lignin, poly(lactic acid), and poly(butylene adipate-co-terephthalate): The effect of lignin heterogeneity on blend morphology and compatibility". Journal of Polymers and the Environment, 22(4), 439-448. |
J231 | Haq, M., Burgueño, R., Mohanty, A. K., & Misra, M. (2014). "Hybrid bio-based composites from UPE/EML blends, natural fibers, and nanoclay". Macromolecular Materials and Engineering, 299(11), 1306-1315. |
J230 | Chen, R., Misra, M., & Mohanty, A. K. (2014). "Injection-moulded biocomposites from polylactic acid (PLA) and recycled carbon fibre: Evaluation of mechanical and thermal properties". Journal of Thermoplastic Composite Materials, 27(9), 1286-1300. |
2013 | |
J229 | Zarrinbakhsh, N., Mohanty, A. K., & Misra, M. (2013). "Improving the interfacial adhesion in a new renewable resource-based biocomposites from biofuel coproduct and biodegradable plastic". Journal of Materials Science,48(17), 6025-6038. |
J228 | Zhou, X., Mohanty, A., & Misra, M. (2013). "A new biodegradable injection moulded bioplastic from modified soy meal and poly (butylene adipate-co-terephthalate): Effect of plasticizer and denaturant". Journal of Polymers and the Environment, 21(3), 615-622. |
J227 | Reddy, J. P., Ahankari, S., Misra, M., & Mohanty, A. (2013). "A new class of injection moulded structural biocomposites from PHBV bioplastic and carbon fibre". Macromolecular Materials and Engineering, 298(7), 789-795. |
J226 | Muniyasamy, S., Anstey, A., Reddy, M. M., Misra, M., & Mohanty, A. (2013). "Biodegradability and compostability of lignocellulosic based composite materials". Journal of Renewable Materials, 1(4), 253-272. |
J225 | Reddy, M. M., Vivekanandhan, S., Misra, M., Bhatia, S. K., & Mohanty, A. K. (2013). "Biobased plastics and bionanocomposites: Current status and future opportunities". Progress in Polymer Science, 38(10), 1653-1689. |
J224 | Poursorkhabi, V., Misra, M., & Mohanty, A. K. (2013). "Extraction of lignin from a coproduct of the cellulosic ethanol industry and its thermal characterization". BioResources, 8(4), 5083-5101. |
J223 | Vadori, R., Mohanty, A. K., & Misra, M. (2013). "The effect of mold temperature on the performance of injection molded poly(lactic acid) based bioplastic". Macromolecular Materials and Engineering, 298(9), 981-990. |
J222 | Muniyasamy, S., Reddy, M. M., Misra, M., & Mohanty, A. (2013). "Biodegradable green composites from bioethanol co-product and poly(butylene adipate-co-terephthalate)". Industrial Crops and Products, 43, 812-819. |
J221 | Toro, C., Reddy, M. M., Navia, R., Rivas, M., Misra, M., & Mohanty, A. K. (2013). "Characterization and application in biocomposites of residual microalgal biomass generated in third generation biodiesel". Journal of Polymers and the Environment, 21(4), 944-951. |
J220 | Nagarajan, V., Mohanty, A. K., & Misra, M. (2013). "Sustainable green composites: Value addition to agricultural residues and perennial grasses". ACS Sustainable Chemistry & Engineering, 1(3), 325-333. |
J219 | Deka, H., Misra, M., & Mohanty, A. (2013). "Renewable resource based all green composites from kenaf biofiber and poly(furfuryl alcohol) bioresin". Industrial Crops and Products, 41, 94-101. |
J218 | Reddy, J. P., Misra, M., & Mohanty, A. (2012). "Renewable resources-based PTT [poly(trimethylene terephthalate)]/switchgrass fiber composites: The effect of compatibilization". Pure and Applied Chemistry, 85(3), 521-532. |
J217 | Vivekanandhan, S., Venkateswarlu, M., Carnahan, D., Misra, M., Mohanty, A. K., & Satyanarayana, N. (2013). "Sol-gel mediated surface modification of nanocrystalline NiFe2O4 spinel powders with amorphous SiO2". Ceramics International, 39(4), 4105-4111. |
J216 | Nanda, M. R., Misra, M., & Mohanty, A. K. (2013). "Performance evaluation of biofibers and their hybrids as reinforcements in bioplastic composites". Macromolecular Materials and Engineering, 298(7), 779-788. |
J215 | Nagarajan, V., Misra, M., & Mohanty, A. K. (2013). "New engineered biocomposites from poly(3-hydroxybutyrate-co-3-hydroxyvalerate)(PHBV)/poly(butylene adipate-co-terephthalate)(PBAT) blends and switchgrass: Fabrication and performance evaluation". Industrial Crops and Products, 42, 461-468. |
J214 | Luo, X., Mohanty, A., & Misra, M. (2013). "Lignin as a reactive reinforcing filler for water-blown rigid biofoam composites from soy oil-based polyurethane". Industrial Crops and Products, 47, 13-19. |
J213 | Reddy, J. P., Misra, M., & Mohanty, A. (2013). "Injection moulded biocomposites from oat hull and polypropylene/polylactide blend: Fabrication and performance evaluation". Advances in Mechanical Engineering, 5, 761840. |
J212 | Özgür Seydibeyoğlu, M., Misra, M., Mohanty, A., Blaker, J. J., Lee, K. Y., Bismarck, A., & Kazemizadeh, M. (2013). "Green polyurethane nanocomposites from soy polyol and bacterial cellulose". Journal of Materials Science, 48(5), 2167-2175. |
J211 | Luo, X., Mohanty, A., & Misra, M. (2013). "Green composites from soy-based biopolyurethane with microcrystalline cellulose". Macromolecular Materials and Engineering, 298(4), 412-418. |
J210 | Zarrinbakhsh, N., Mohanty, A. K., & Misra, M. (2013). "Fundamental studies on water-washing of the corn ethanol coproduct (DDGS) and its characterization for biocomposite applications". Biomass and Bioenergy, 55, 251-259. |
J209 | Panesar, S. S., Jacob, S., Misra, M., & Mohanty, A. K. (2013). "Functionalization of lignin: Fundamental studies on aqueous graft copolymerization with vinyl acetate". Industrial Crops and Products, 46, 191-196. |
J208 | Kumar, P. R., Venkateswarlu, M., Misra, M., Mohanty, A. K., & Satyanarayana, N. (2013). "Enhanced conductivity and electrical relaxation studies of carbon-coated LiMnPO4 nanorods". Ionics, 19(3), 461-469. |
J207 | Konwarh, R., Misra, M., Mohanty, A. K., & Karak, N. (2013). "Diameter-tuning of electrospun cellulose acetate fibers: A Box-Behnken design (BBD) study". Carbohydrate polymers, 92(2), 1100-1106. |
J206 | Sahoo, S., Misra, M., & Mohanty, A. K. (2013). "Effect of compatibilizer and fillers on the properties of injection molded lignin-based hybrid green composites". Journal of Applied Polymer Science, 127(5), 4110-4121. |
J205 | Zaverl, M., Misra, M., & Mohanty, A. (2013). "Use of the taguchi method for optimization of poly(butylene terephthalate) and poly(trimethylene terephthalate) blends through injection molding". International Polymer Processing, 28(5), 454-462. |
J204 | Jacob, S., Misra, M., & Mohanty, A. (2013). "Green synthesis for lignin plasticization". Journal of Renewable Materials, 1(2), 154-165. |
2012 | |
J203 | Reddy, M. M., Mohanty, A. K., & Misra, M. (2012). "Bio-based materials in the new bio-economy". Chemical Engineering Progress, 108(5), 37-42. |
J202 | Ramesh Kumar, P., Khan, N., Vivekanandhan, S., Satyanarayana, N., Mohanty, A. K., & Misra, M. (2012). "Nanofibers: Effective generation by electrospinning and their applications". Journal of nanoscience and nanotechnology, 12(1), 1-25. |
J201 | Gonugunta, P., Vivekanandhan, S., Mohanty, A. K., & Misra, M. (2012). "A study on synthesis and characterization of biobased carbon nanoparticles from lignin". World Journal of Nano Science and Engineering, 2(03), 148-153. |
J200 | Schreiber, M., Vivekanandhan, S., Mohanty, A. K., & Misra, M. (2012). "A study on the electrospinning behaviour and nanofibre morphology of anionically charged lignin". Adv Mat Lett, 3, 476-480. |
J199 | Petla, R. K., Vivekanandhan, S., Misra, M., Mohanty, A. K., & Satyanarayana, N. (2012). "Soybean (Glycine max) leaf extract based green synthesis of palladium nanoparticles". Journal of Biomaterials and Nanobiotechnology. 3(1), 14-19. |
J198 | Zaverl, M., Seydibeyoğlu, M., Misra, M., & Mohanty, A. (2012). "Studies on recyclability of polyhydroxybutyrate-co-valerate bioplastic: Multiple melt processing and performance evaluations". Journal of Applied Polymer Science, 125(S2). E324-E331. |
J197 | Nyambo, C., Misra, M., & Mohanty, A. K. (2012). "Toughening of brittle poly(lactide) with hyperbranched poly(ester-amide) and isocyanate-terminated prepolymer of polybutadiene". Journal of Materials Science, 47(13), 5158-5168. |
J196 | Reddy, M. M., Mohanty, A. K., & Misra, M. (2012). "Optimization of tensile properties thermoplastic blends from soy and biodegradable polyesters: Taguchi design of experiments approach". Journal of Materials Science,47(6), 2591-2599. |
J195 | Jacob, S., Misra, M., & Mohanty, A. K. (2012). "Novel biocomposites from poly(trimethylene terephthalate) and recycled carbon fibres". Journal of Materials Science, 47(16), 6056-6065. |
J194 | Reyes, I., Ciudad, G., Misra, M., Mohanty, A., Jeison, D., & Navia, R. (2012). "Novel sequential batch membrane reactor to increase fatty acid methyl esters quality at low methanol to oil molar ratio". Chemical engineering journal, 197, 459-467. |
J193 | Nanda, M. R., Misra, M., & Mohanty, A. K. (2012). "Mechanical performance of soy-hull-reinforced bioplastic green composites: A comparison with polypropylene composites". Macromolecular Materials and Engineering,297(2), 184-194. |
J192 | Vivekanandhan, S., Christensen, L., Misra, M., & Mohanty, A. K. (2012). "Green process for impregnation of silver nanoparticles into microcrystalline cellulose and their antimicrobial bionanocomposite films". Journal of Biomaterials and Nanobiotechnology, 3(3), 371-376. |
J191 | Diebel, W., Reddy, M. M., Misra, M., & Mohanty, A. (2012). "Material property characterization of co-products from biofuel industries: Potential uses in value-added biocomposites". Biomass and Bioenergy, 37, 88-96. |
J190 | Zhang, K., Mohanty, A. K., & Misra, M. (2012). "Fully biodegradable and biorenewable ternary blends from polylactide, poly(3-hydroxybutyrate-co-hydroxyvalerate) and poly(butylene succinate) with balanced properties". ACS applied materials & interfaces, 4(6), 3091-3101. |
J189 | Vivekanandhan, S., Venkateswarlu, M., Carnahan, D., Misra, M., Mohanty, A. K., & Satyanarayana, N. (2012). "Functionalization of single-walled carbon nanotubes with silver nanoparticles using Tecoma stans leaf extract". Physica E: Low-dimensional Systems and Nanostructures, 44(7), 1725-1729. |
J188 | Reddy, M. M., Mohanty, A. K., & Misra, M. (2012). "Biodegradable blends from plasticized soy meal, polycaprolactone, and poly(butylene succinate)". Macromolecular Materials and Engineering, 297(5), 455-463. |
J187 | Luo, X., Mohanty, A., & Misra, M. (2012). "Water-blown rigid biofoams from soy-based biopolyurethane and microcrystalline cellulose". Journal of the American Oil Chemists' Society, 89(11), 2057-2065. |
J186 | Vivekanandhan, S., Misra, M., & Mohanty, A. K. (2012). "Thermal, mechanical, and morphological investigation of injection molded poly(trimethylene terephthalate)/carbon fiber composites". Polymer Composites,33(11), 1933-1940. |
J185 | Jain, S., Misra, M., Mohanty, A. K., & Ghosh, A. K. (2012). "Thermal, mechanical and rheological behavior of poly(lactic acid)/talc composites". Journal of Polymers and the Environment, 20(4), 1027-1037. |
J184 | Mason, C., Vivekanandhan, S., Misra, M., & Mohanty, A. K. (2012). "Switchgrass (Panicum virgatum) extract mediated green synthesis of silver nanoparticles". World Journal of Nano Science and Engineering, 2(02), 47-52. |
J183 | Khan, N. ,Misra, M., Koch, T., & Mohanty, A. K.(2012). "Applications of electrospun nanofibers in the biomedical field". Studies by Undergraduate Researchers at Guelph, 5(2), 63-73. |
J182 | Navia, R., & Mohanty, A. K. (2012). "Resources and waste management in a bio-based economy". Waste Management & Research, 30(3), 215-216. |
2011 | |
J181 | Bonham, S., Misra, M., & Mohanty, A. K. (2011). "Effect of co-rotation and counter-rotation extrusion processing on the thermal and mechanical properties, and morphology of plasticized soy protein isolate and poly(butylene succinate) blends". Macromolecular Materials and Engineering,296(9), 788-801. |
J180 | Kumar, P. R., Venkateswarlu, M., Misra, M., Mohanty, A. K., & Satyanayana, N. (2011). "Synthesis, characterization and electrical properties of carbon coated LiCoPO4 nanoparticles". Journal of nanoscience and nanotechnology, 11(4), 3314-3322. |
J179 | Nanda, M. R., Misra, M., & Mohanty, A. K. (2011). "The effects of process engineering on the performance of PLA and PHBV blends". Macromolecular Materials and Engineering, 296(8), 719-728. |
J178 | Prakash, I., Nallamuthu, N., Muralidharan, P., Venkateswarlu, M., Misra, M., Mohanty, A., & Satyanarayana, N. (2011). "Preparation and characterization of nanocrystalline CoFe2O4 deposited on SiO2: in situ sol-gel process". Journal of sol-gel science and technology, 58(1), 24-32. |
J177 | Das, K., Ray, D., Bandyopadhyay, N. R., Sahoo, S., Mohanty, A. K., & Misra, M. (2011). "Physico-mechanical properties of the jute micro/nanofibril reinforced starch/polyvinyl alcohol biocomposite films". Composites Part B: Engineering, 42(3), 376-381. |
J176 | Ahankari, S. S., Mohanty, A. K., & Misra, M. (2011). "Mechanical behaviour of agro-residue reinforced poly(3-hydroxybutyrate-co-3-hydroxyvalerate),(PHBV) green composites: A comparison with traditional polypropylene composites". Composites Science and Technology, 71(5), 653-657. |
J175 | Nyambo, C., Mohanty, A. K., & Misra, M. (2011). "Effect of maleated compatibilizer on performance of PLA/wheat Straw-Based green composites". Macromolecular Materials and Engineering, 296(8), 710-718. |
J174 | Sahoo, S., Seydibeyoğlua, M., Mohanty, A. K., & Misra, M. (2011). "Characterization of industrial lignins for their utilization in future value added applications". Biomass and bioenergy, 35(10), 4230-4237. |
J173 | Christensen, L., Vivekanandhan, S., Misra, M., & Mohanty, A. K. (2011). "Biosynthesis of silver nanoparticles using murraya koenigii (curry leaf): An investigation on the effect of broth concentration in reduction mechanism and particle size". Adv Mat Lett, 2(6), 429-434. |
J172 | Zarrinbakhsh, N., Misra, M., & Mohanty, A. K. (2011). "Biodegradable green composites from distiller's dried grains with solubles (DDGS) and a polyhydroxy(butyrate-co-valerate)(PHBV)-Based Bioplastic". Macromolecular Materials and Engineering, 296(11), 1035-1045. |
J171 | Sahoo, S., Misra, M., & Mohanty, A. K. (2011). "Enhanced properties of lignin-based biodegradable polymer composites using injection moulding process". Composites Part A: Applied Science and Manufacturing, 42(11), 1710-1718. |
J169 | Xu, F., & Mohanty, A. K. (2011). "Structural characterization of lignins isolated from Caragana sinica using FT-IR and NMR spectroscopy". Spectroscopy and Spectral Analysis, 31(9), 2369-2376. |
J168 | Purkait, B. S., Ray, D., Sengupta, S., Kar, T., Mohanty, A., & Misra, M. (2010). "Isolation of cellulose nanoparticles from sesame husk". Industrial & Engineering Chemistry Research, 50(2), 871-876. |
J167 | Das, K., Ray, D., Banerjee, C., Bandyopadhyay, N. R., Mohanty, A. K., & Misra, M. (2011). "Novel materials from unsaturated polyester resin/styrene/tung oil blends with high impact strengths and enhanced mechanical properties". Journal of Applied Polymer Science, 119(4), 2174-2182. |
2010 | |
J166 | Vivekanandhan, S., Venkateswarlu, M., Misra, M., Mohanty, A. K., & Satyanarayana, N. (2011). "Novel polymeric resin route for the surface modification of nanocrystalline LiCoO2 particles with Al2O3". Nanoscience and Nanotechnology Letters, 3(2), 161-165. |
J165 | Reddy, M., Mohanty, A. K., & Misra, M. (2010). "Thermoplastics from soy protein: A review on processing, blends and composites". Journal of Biobased Materials and Bioenergy, 4(4), 298-316. |
J164 | Vivekanandhan, S., Tang, D., Misra, M., & Mohanty, A. K. (2010). "Novel glycine max (soybean) leaf extract based biological process for the functionalization of carbon nanotubes with silver nanoparticles". Nanoscience and Nanotechnology Letters, 2(3), 240-243. |
J163 | Pandey, J. K., Ahn, S. H., Lee, C. S., Mohanty, A. K., & Misra, M. (2010). "Recent advances in the application of natural fiber based composites". Macromolecular Materials and Engineering, 295(11), 975-989. |
J162 | Das, K., Ray, D., Bandyopadhyay, N. R., Gupta, A., Sengupta, S., Sahoo, S., Mohanty, A. K.& Misra, M. (2010). "Preparation and characterization of cross-linked starch/poly(vinyl alcohol) green films with low moisture absorption". Industrial & Engineering Chemistry Research, 49(5), 2176-2185. |
J161 | Nyambo, C., Mohanty, A. K., & Misra, M. (2010). "Polylactide-based renewable green composites from agricultural residues and their hybrids". Biomacromolecules, 11(6), 1654-1660. |
J160 | Das, K., Ray, D., Banerjee, C., Bandyopadhyay, N. R., Sahoo, S., Mohanty, A. K., & Misra, M. (2010). "Physicomechanical and thermal properties of jute-nanofiber-reinforced biocopolyester composites". Industrial & Engineering Chemistry Research, 49(6), 2775-2782. |
J159 | Ray, D., Das, K., Ghosh, S. N., Bandyopadhyay, N. R., Sahoo, S., Mohanty, A. K., & Misra, M. (2010). "Novel materials from sesame husks and unsaturated polyester resin". Industrial & Engineering Chemistry Research,49(13), 6069-6074. |
J158 | Jain, S., Reddy, M. M., Mohanty, A. K., Misra, M., & Ghosh, A. K. (2010). "A new biodegradable flexible composite sheet from poly(lactic acid)/poly (ε-caprolactone) blends and micro-alc". Macromolecular materials and engineering, 295(8), 750-762. |
J157 | Singh, S., Mohanty, A. K., & Misra, M. (2010). "Hybrid bio-composite from talc, wood fiber and bioplastic: Fabrication and characterization". Composites Part A: Applied Science and Manufacturing, 41(2), 304-312. |
J156 | Das, K., Ray, D., Banerjee, I., Bandyopadhyay, N. R., Sengupta, S., Mohanty, A. K., & Misra, M. (2010). "Crystalline morphology of PLA/clay nanocomposite films and its correlation with other properties". Journal of applied polymer science, 118(1), 143-151. |
J155 | Pradhan, R., Misra, M., Erickson, L., & Mohanty, A. (2010). "Compostability and biodegradation study of PLA-wheat straw and PLA-soy straw based green composites in simulated composting bioreactor". Bioresource technology, 101(21), 8489-8491. |
J154 | Alpatova, A. L., Shan, W., Babica, P., Upham, B. L., Rogensues, A. R., Masten, S. J, Drown, E., Mohanty, A. K., Alociljae, E. C., & Tarabara, V. V. (2010). "Single-walled carbon nanotubes dispersed in aqueous media via non-covalent functionalization: Effect of dispersant on the stability, cytotoxicity, and epigenetic toxicity of nanotube suspensions". Water Research, 44(2), 505-520. |
J153 | Seydibeyoğlu, M., Misra, M., & Mohanty, A. (2010). "Synergistic improvements in the impact strength and % elongation of polyhydroxybutyrate-co-valerate copolymers with functionalized soybean oils and POSS". International Journal of Plastics Technology, 14(1), 1-16. |
J152 | Pradhan, R., Reddy, M., Diebel, W., Erickson, L., Misra, M., & Mohanty, A. (2010). "Comparative compostability and biodegradation studies of various components of green composites and their blends in simulated aerobic composting bioreactor". International Journal of Plastics Technology, 14(1), 45-50. |
J151 | Das, K., Ray, D., Adhikary, K., Bandyopadhyay, N. R., Mohanty, A. K., & Misra, M. (2010). "Development of recycled polypropylene matrix composites reinforced with fly ash". Journal of Reinforced Plastics and Composites,29(4), 510-517. |
2009 | |
J150 | Ray, D., Roy, P., Sengupta, S., Sengupta, S. P., Mohanty, A. K., & Misra, M. (2009). "A study of physicomechanical and morphological properties of starch/poly(vinylalcohol) based films". Journal of Polymers and the Environment, 17(1), 56-63. |
J149 | Das, K., Ray, D., Bandyopadhyay, N. R., Ghosh, T., Mohanty, A. K., & Misra, M. (2009). "A study of the mechanical, thermal and morphological properties of microcrystalline cellulose particles prepared from cotton slivers using different acid concentrations". Cellulose, 16(5), 783-793. |
J148 | Haq, M., Burgueño, R., Mohanty, A. K., & Misra, M. (2009). "Bio-based unsaturated polyester/layered silicate nanocomposites: Characterization and thermo-physical properties". Composites Part A: Applied Science and Manufacturing, 40(4), 540-547. |
J147 | Ray, D., Roy, P., Sengupta, S., Sengupta, S. P., Mohanty, A. K., & Misra, M. (2009). "A study of dynamic mechanical and thermal behavior of starch/poly(vinylalcohol) based films". Journal of Polymers and the Environment, 17(1), 49-55. |
J146 | Vivekanandhan, S., Misra, M., & Mohanty, A. K. (2009). "Biological synthesis of silver nanoparticles using Glycine max (soybean) leaf extract: An investigation on different soybean varieties". Journal of Nanoscience and Nanotechnology, 9(12), 6828-6833. |
J145 | Das, K., Ray, D., Bandyopadhyay, N. R., Sengupta, S., Sengupta, S. P., Mohanty, A. K., & Misra, M. (2009). "Preparation and characterization of organoclay reinforced polylactic acid biocomposite films". Advanced Materials Research (Vol. 67, pp. 289-293). |
J144 | Pradhan, R., Erickson, L., Misra, M., & Mohanty, A. (2009). "Biological treatment of soy straw: Physicochemical characterization". Journal of Biobased Materials and Bioenergy, 3(4), 373-379. |
J143 | Kumar, S., Mohanty, A. K., Erickson, L., & Misra, M. (2009). "Lignin and its applications with polymers". Journal of Biobased Materials and Bioenergy,3(1), 1-24. |
J142 | Das, K., Bandyopadhyay, N. R., Ray, D., Mitra, D., Sengupta, S., Sengupta, S. P., Mohanty, A. K., & Misra, M. (2009). "Physico-mechanical and morphological study of starch/polyvinylalcohol based biocomposite films reinforced with microcrystalline cellulose". Journal of Biobased Materials and Bioenergy, 3(1), 100-107. |
J141 | Haq, M., Burgueño, R., Mohanty, A. K., & Misra, M. (2009). "Processing techniques for bio-based unsaturated-polyester/clay nanocomposites: Tensile properties, efficiency, and limits". Composites Part A: Applied Science and Manufacturing, 40(4), 394-403. |
2008 | |
J140 | Singh, S., Mohanty, A. K., Sugie, T., Takai, Y., & Hamada, H. (2008). "Renewable resource based biocomposites from natural fiber and polyhydroxybutyrate-co-valerate (PHBV) bioplastic". Composites Part A: Applied Science and Manufacturing, 39(5), 875-886. |
J139 | Liu, W., Mohanty, A. K., Askeland, P., Drzal, L. T., & Misra, M. (2008). "Modification of soy protein plastic with functional monomer with reactive extrusion". Journal of Polymers and the Environment, 16(3), 177-182. |
J138 | Haq, M., Burgueño, R., Mohanty, A. K., & Misra, M. (2008). "Hybrid bio-based composites from blends of unsaturated polyester and soybean oil reinforced with nanoclay and natural fibers". Composites Science and Technology, 68(15), 3344-3351. |
J137 | Huda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2008). "Effect of fiber surface-treatments on the properties of laminated biocomposites from poly(lactic acid)(PLA) and kenaf fibers". Composites Science and Technology,68(2), 424-432. |
J136 | Huda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2008). "Effect of chemical modifications of the pineapple leaf fiber surfaces on the interfacial and mechanical properties of laminated biocomposites". Composite Interfaces, 15(2-3), 169-191. |
J135 | Liu, L., Jin, T., Liu, C. K., Hicks, K., Mohanty, A. K., Bhardwaj, R., & Misra, M. (2008). "A preliminary study on antimicrobial edible films from pectin and other food hydrocolloids by extrusion method". Journal of Natural Fibers, 5(4), 366-382. |
J134 | Ray, D., Banerjee, S., Mohanty, A. K., & Misra, M. (2008). "Thermal and electrical behavior of vinylester resin matrix composites filled with fly ash particles". Polymer composites, 29(1), 58-62. |
2007 | |
J133 | Singh, S., & Mohanty, A. K. (2007). "Wood fiber reinforced bacterial bioplastic composites: Fabrication and performance evaluation". Composites Science and Technology, 67(9), 1753-1763. |
J132 | Drown, E. K., Mohanty, A. K., Parulekar, Y., Hasija, D., Harte, B. R., Misra, M., & Kurian, J. V. (2007). "The surface characteristics of organoclays and their effect on the properties of poly(trimethylene terephthalate) nanocomposites". Composites Science and Technology, 67(15), 3168-3175. |
J131 | Huda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2007). "The effect of silane treated-and untreated-talc on the mechanical and physico-mechanical properties of poly(lactic acid)/newspaper fibers/talc hybrid composites". Composites Part B: Engineering, 38(3), 367-379. |
J130 | Wu, Q., Selke, S., & Mohanty, A. K. (2007). "Processing and properties of biobased blends from soy meal and natural rubber". Macromolecular Materials and Engineering, 292(10-11), 1149-1157. |
J129 | Liu, W., Thayer, K., Misra, M., Drzal, L. T., & Mohanty, A. K. (2007). "Processing and physical properties of native grass-reinforced biocomposites". Polymer Engineering & Science, 47(7), 969-976. |
J128 | Miyagawa, H., Mohanty, A. K., Burgueño, R., Drzal, L. T., & Misra, M. (2007). "Novel biobased resins from blends of functionalized soybean oil and unsaturated polyester resin". Journal of Polymer Science Part B: Polymer Physics, 45(6), 698-704. |
J127 | Ray, D., Bose, N. R., Mohanty, A. K., & Misra, M. (2007). "Modification of the dynamic damping behaviour of jute/vinylester composites with latex interlayer". Composites Part B: Engineering, 38(3), 380-385. |
J126 | Bhardwaj, R., & Mohanty, A. K. (2007). "Modification of brittle polylactide by novel hyperbranched polymer-based nanostructures". Biomacromolecules,8(8), 2476-2484. |
J125 | Zampaloni, M., Pourboghrat, F., Yankovich, S. A., Rodgers, B. N., Moore, J., Drzal, L. T., ... & Misra, M. (2007). "Kenaf natural fiber reinforced polypropylene composites: A discussion on manufacturing problems and solutions". Composites Part A: Applied Science and Manufacturing, 38(6), 1569-1580. |
J124 | Liu, W., Drzal, L. T., Mohanty, A. K., & Misra, M. (2007). "Influence of processing methods and fiber length on physical properties of kenaf fiber reinforced soy based biocomposites". Composites Part B: Engineering, 38(3), 352-359. |
J123 | Parulekar, Y., & Mohanty, A. K. (2007). "Extruded biodegradable cast films from polyhydroxyalkanoate and thermoplastic starch blends: Fabrication and characterization". Macromolecular materials and engineering, 292(12), 1218-1228. |
J122 | Ray, D., Sengupta, S., Sengupta, S. P., Mohanty, A. K., & Misra, M. (2007). "A study of the mechanical and fracture behavior of jute-fabric-reinforced clay-modified thermoplastic starch-matrix composites". Macromolecular Materials and Engineering, 292(10-11), 1075-1084. |
J121 | Sahoo, S., Nakai, A., Kotaki, M., Ishiaku, U. S., Mohanty, A. K., Misra, M., & Hamada, H. (2007). "Mechanical properties and durability of jute reinforced thermosetting composites". Journal of Biobased Materials and Bioenergy,1(3), 427-436. |
J120 | Parulekar, Y., Mohanty, A. K., & Imam, S. H. (2007). "Biodegradable nanocomposites from toughened polyhydroxybutyrate and titanate-modified montmorillonite clay". Journal of nanoscience and nanotechnology, 7(10), 3580-3589. |
J119 | Wu, Q., & Mohanty, A. K. (2007). "Renewable resource based biocomposites from coproduct of dry milling corn ethanol industry and castor oil based biopolyurethanes". Journal of Biobased Materials and Bioenergy, 1(2), 257-265. |
J118 | Bhardwaj, R., & Mohanty, A. K. (2007). "Advances in the properties of polylactides based materials: A review". Journal of Biobased Materials and Bioenergy, 1(2), 191-209. |
2006 | |
J117 | Aithani, D., & Mohanty, A. K. (2006). "Value-added new materials from byproduct of corn based ethanol industries: Blends of plasticized corn gluten meal and poly(ε-caprolactone)". Industrial & engineering chemistry research, 45(18), 6147-6152. |
J116 | Huda, M., Drzal, L., Misra, M., & Mohanty, A. (2006). "Wood-fiber-reinforced poly(lactic acid) composites: Evaluation of the physicomechanical and morphological properties". Journal of Applied Polymer Science, 102(5), 4856-4869. |
J115 | Ray, D., Bhattacharya, D., Mohanty, A. K., Drzal, L. T., & Misra, M. (2006). "Static and dynamic mechanical properties of vinylester resin matrix composites filled with fly ash". Macromolecular Materials and Engineering, 291(7), 784-792. |
J114 | Bhardwaj, R., Mohanty, A. K., Drzal, L. T., Pourboghrat, F., & Misra, M. (2006). "Renewable resource-based green composites from recycled cellulose fiber and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) bioplastic". Biomacromolecules, 7(6), 2044-2051. |
J113 | Ray, D., Sengupta, S., Sengupta, S. P., Mohanty, A. K., & Misra, M. (2006). "Preparation and properties of vinylester resin/clay nanocomposites". Macromolecular Materials and Engineering, 291(12), 1513-1520. |
J112 | Rhim, J. W., Mohanty, K. A., Singh, S. P., & Ng, P. K. (2006). "Preparation and properties of biodegradable multilayer films based on soy protein isolate and poly(lactide)". Industrial & engineering chemistry research, 45(9), 3059-3066. |
J111 | Whaling, A., Bhardwaj, R., & Mohanty, A. K. (2006). "Novel talc-filled biodegradable bacterial polyester composites". Industrial & engineering chemistry research, 45(22), 7497-7503. |
J110 | Tummala, P., Liu, W., Drzal, L. T., Mohanty, A. K., & Misra, M. (2006). "Influence of plasticizers on thermal and mechanical properties and morphology of soy-based bioplastics". Industrial & engineering chemistry research, 45(22), 7491-7496. |
J109 | Park, H. M., Mohanty, A. K., Drzal, L. T., Lee, E., Mielewski, D. F., & Misra, M. (2006). "Effect of sequential mixing and compounding conditions on cellulose acetate/layered silicate nanocomposites". Journal of Polymers and the Environment, 14(1), 27-35. |
J108 | Mehta, G., Drzal, L. T., Mohanty, A. K., & Misra, M. (2006). "Effect of fiber surface treatment on the properties of biocomposites from nonwoven industrial hemp fiber mats and unsaturated polyester resin". Journal of applied polymer science, 99(3), 1055-1068. |
J107 | Mehta, G., Mohanty, A. K., Drzal, L. T., Kamdem, D. P., & Misra, M. (2006). "Effect of accelerated weathering on biocomposites processed by SMC and compression molding". Journal of Polymers and the Environment, 14(4), 359-368. |
J106 | Miyagawa, H., Mohanty, A. K., Burgueño, R., Drzal, L. T., & Misra, M. (2006). "Development of biobased unsaturated polyester containing functionalized linseed oil". Industrial & engineering chemistry research, 45(3), 1014-1018. |
J105 | Huda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2006). "Chopped glass and recycled newspaper as reinforcement fibers in injection molded poly(lactic acid)(PLA) composites: A comparative study". Composites Science and Technology, 66(11), 1813-1824. |
J104 | Miyagawa, H., Mohanty, A. K., Burgueño, R., Drzal, L. T., & Misra, M. (2006). "Characterization and thermophysical properties of unsaturated polyester-layered silicate nanocomposites". Journal of nanoscience and nanotechnology, 6(2), 464-471. |
J103 | Parulekar, Y., & Mohanty, A. K. (2006). "Biodegradable toughened polymers from renewable resources: Blends of polyhydroxybutyrate with epoxidized natural rubber and maleated polybutadiene". Green Chemistry, 8(2), 206-213. |
J102 | Wibowo, A. C., Misra, M., Park, H. M., Drzal, L. T., Schalek, R., & Mohanty, A. K. (2006). "Biodegradable nanocomposites from cellulose acetate: Mechanical, morphological, and thermal properties". Composites Part A: Applied Science and Manufacturing, 37(9), 1428-1433. |
J101 | Miyagawa, H., Jurek, R. J., Mohanty, A. K., Misra, M., & Drzal, L. T. (2006). "Biobased epoxy/clay nanocomposites as a new matrix for CFRP". Composites Part A: Applied Science and Manufacturing, 37(1), 54-62. |
J100 | Wibowo, A. C., Desai, S. M., Mohanty, A. K., Drzal, L. T., & Misra, M. (2006). "A solvent free graft copolymerization of maleic anhydride onto cellulose acetate butyrate bioplastic by reactive extrusion". Macromolecular Materials and Engineering, 291(1), 90-95. |
J99 | Rhim, J. W., Mohanty, A. K., Singh, S. P., & Ng, P. K. (2006). "Effect of the processing methods on the performance of polylactide films: Thermocompression versus solvent casting". Journal of Applied Polymer Science, 101(6), 3736-3742. |
2005 | |
J98 | Miyagawa, H., Mohanty, A. K., Drzal, L. T., & Misra, M. (2004). "Nanocomposites from biobased epoxy and single-wall carbon nanotubes: Synthesis, and mechanical and thermophysical properties evaluation". Nanotechnology, 16(1), 118-124. |
J97 | Pandey, J. K., Kumar, A. P., Misra, M., Mohanty, A. K., Drzal, L. T., & Palsingh, R. (2005). "Recent advances in biodegradable nanocomposites". Journal of Nanoscience and Nanotechnology, 5(4), 497-526. |
J96 | Burgueno, R., Quagliata, M. J., Mehta, G. M., Mohanty, A. K., Misra, M., & Drzal, L. T. (2005). "Sustainable cellular biocomposites from natural fibers and unsaturated polyester resin for housing panel applications". Journal of Polymers and the Environment, 13(2), 139-149. |
J95 | Choi, J. S., Lim, S. T., Choi, H. J., Hong, S. M., Mohanty, A. K., Drzal, L. T., & Wibowo, A. C. (2005, April). "Rheological, thermal, and morphological characteristics of plasticized cellulose acetate composite with natural fibers". In Macromolecular Symposia (Vol. 224, No. 1, pp. 297-308). WILEY-PVCH Verlag. |
J94 | Mehta, G., Mohanty, A. K., Thayer, K., Misra, M., & Drzal, L. T. (2005). "Novel biocomposites sheet molding compounds for low cost housing panel applications". Journal of Polymers and the Environment, 13(2), 169-175. |
J93 | Liu, W., Mohanty, A. K., Drzal, L. T., & Misra, M. (2005). "Novel biocomposites from native grass and soy based bioplastic: Processing and properties evaluation". Industrial & engineering chemistry research, 44(18), 7105-7112. |
J92 | Miyagawa, H., Misra, M., Drzal, L. T., & Mohanty, A. K. (2005). "Novel biobased nanocomposites from functionalized vegetable oil and organically-modified layered silicate clay". Polymer, 46(2), 445-453. |
J91 | Miyagawa, H., Misra, M., & Mohanty, A. K. (2005). "Mechanical properties of carbon nanotubes and their polymer nanocomposites". Journal of Nanoscience and Nanotechnology, 5(10), 1593-1615. |
J90 | Liu, W., Mohanty, A. K., Drzal, L. T., Misra, M., Kurian, J. V., Miller, R. W., & Strickland, N. (2005). "Injection molded glass fiber reinforced poly(trimethylene terephthalate) composites: Fabrication and properties evaluation". Industrial & engineering chemistry research, 44(4), 857-862. |
J89 | Mohanty, A. K., Tummala, P., Liu, W., Misra, M., Mulukutla, P. V., & Drzal, L. T. (2005). "Injection molded biocomposites from soy protein based bioplastic and short industrial hemp fiber". Journal of Polymers and the Environment, 13(3), 279-285. |
J88 | Burgueno, R., Quagliata, M. J., Mohanty, A. K., Mehta, G., Drzal, L. T., & Misra, M. (2005). "Hybrid biofiber-based composites for structural cellular plates". Composites Part A: applied science and manufacturing, 36(5), 581-593. |
J87 | Burgueno, R., Quagliata, M. J., Mohanty, A. K., Mehta, G., Drzal, L. T., & Misra, M. (2005). "Hierarchical cellular designs for load-bearing biocomposite beams and plates". Materials Science and Engineering: A, 390(1), 178-187. |
J86 | Liu, W., Misra, M., Askeland, P., Drzal, L. T., & Mohanty, A. K. (2005). "Green composites from soy based plastic and pineapple leaf fiber: Fabrication and properties evaluation". Polymer, 46(8), 2710-2721. |
J85 | Huda, M. S., Mohanty, A. K., Drzal, L. T., Schut, E., & Misra, M. (2005)."Green composites from recycled cellulose and poly(lactic acid): Physico-mechanical and morphological properties evaluation". Journal of Materials Science, 40(16), 4221-4229. |
J84 | Miyagawa, H., Misra, M., Drzal, L. T., & Mohanty, A. K. (2005). "Fracture toughness and impact strength of anhydride-cured biobased epoxy". Polymer Engineering & Science, 45(4), 487-495. |
J83 | Miyagawa, H., Misra, M., Drzal, L. T., & Mohanty, A. K. (2005). "Biobased epoxy/layered silicate nanocomposites: Thermophysical properties and fracture behavior evaluation". Journal of Polymers and the Environment,13(2), 87-96. |
J82 | Huda, M. S., Drzal, L. T., Misra, M., Mohanty, A. K., Williams, K., & Mielewski, D. F. (2005). "A study on biocomposites from recycled newspaper fiber and poly(lactic acid)". Industrial & engineering chemistry research,44(15), 5593-5601. |
J81 | Parulekar, Y., & Mohanty, A. K. (2005). "Effect of titanate-based surface on hydrophilicity and interlayer spacing of montmorillonite clay for polymer nanocomposites". Journal of nanoscience and nanotechnology, 5(12), 2138-2143. |
2004 | |
J80 | Miyagawa, H., Mohanty, A. K., Misra, M., & Drzal, L. T. (2004). "Thermo-physical and impact properties of epoxy containing epoxidized linseed oil, 1". Macromolecular Materials and Engineering, 289(7), 629-635. |
J79 | Miyagawa, H., Mohanty, A. K., Misra, M., & Drzal, L. T. (2004). "Thermo-physical and impact properties of epoxy containing epoxidized linseed oil, 2". Macromolecular Materials and Engineering, 289(7), 636-641. |
J78 | Choi, J. S., Lim, S. T., Choi, H. J., Mohanty, A. K., Drzal, L. T., Misra, M., & Wibowo, A. (2004). "Preparation and characterization of plasticized cellulose acetate biocomposite with natural fiber". Journal of materials science, 39(21), 6631-6633. |
J77 | Burgueno, R., Quagliata, M. J., Mohanty, A. K., Mehta, G., Drzal, L. T., & Misra, M. (2004). "Load-bearing natural fiber composite cellular beams and panels". Composites Part A: applied science and manufacturing, 35(6), 645-656. |
J76 | Liu, W., Mohanty, A. K., Askeland, P., Drzal, L. T., & Misra, M. (2004). "Influence of fiber surface treatment on properties of Indian grass fiber reinforced soy protein based biocomposites". Polymer, 45(22), 7589-7596. |
J75 | Park, H. M., Misra, M., Drzal, L. T., & Mohanty, A. K. (2004). "Green nanocomposites from cellulose acetate bioplastic and clay: Effect of eco-friendly triethyl citrate plasticizer". Biomacromolecules, 5(6), 2281-2288. |
J74 | Mohanty, A. K., Wibowo, A., Misra, M., & Drzal, L. T. (2004). "Effect of process engineering on the performance of natural fiber reinforced cellulose acetate biocomposites". Composites Part A: Applied Science and Manufacturing, 35(3), 363-370. |
J73 | Mehta, G., Mohanty, A. K., Misra, M., & Drzal, L. T. (2004). "Effect of novel sizing on the mechanical and morphological characteristics of natural fiber reinforced unsaturated polyester resin based bio-composites". Journal of materials science, 39(8), 2961-2964. |
J72 | Park, H. M., Liang, X., Mohanty, A. K., Misra, M., & Drzal, L. T. (2004). "Effect of compatibilizer on nanostructure of the biodegradable cellulose acetate/organoclay nanocomposites". Macromolecules, 37(24), 9076-9082. |
J71 | Miyagawa, H., Mohanty, A., Drzal, L. T., & Misra, M. (2004). "Effect of clay and alumina-nanowhisker reinforcements on the mechanical properties of nanocomposites from biobased epoxy: A comparative study". Industrial & engineering chemistry research, 43(22), 7001-7009. |
J70 | Liu, W., Mohanty, A. K., Drzal, L. T., Askel, P., & Misra, M. (2004). "Effects of alkali treatment on the structure, morphology and thermal properties of native grass fibers as reinforcements for polymer matrix composites". Journal of Materials Science, 39(3), 1051-1054. |
J69 | Mehta, G. A. K. M., Mohanty, A. K., Misra, M., & Drzal, L. T. (2004). "Biobased resin as a toughening agent for biocomposites". Green Chemistry,6(5), 254-258. |
J68 | Dwan'isa, J. P. L., Mohanty, A. K., Misra, M., Drzal, L. T., & Kazemizadeh, M. (2004). "Biobased polyurethane and its composite with glass fiber". Journal of materials science, 39(6), 2081-2087. |
J67 | Joshi, S. V., Drzal, L. T., Mohanty, A. K., & Arora, S. (2004). "Are natural fiber composites environmentally superior to glass fiber reinforced composites?". Composites Part A: Applied science and manufacturing, 35(3), 371-376. |
J66 | Mishra, S., Mohanty, A. K., Drzal, L. T., Misra, M., & Hinrichsen, G. (2004). "A review on pineapple leaf fibers, sisal fibers and their biocomposites". Macromolecular Materials and Engineering, 289(11), 955-974. |
J65 | Dwan'isa, J. P. L., Mohanty, A. K., Misra, M., Drzal, L. T., & Kazemizadeh, M. (2004). "Novel soy oil based polyurethane composites: Fabrication and dynamic mechanical properties evaluation". Journal of materials science,39(5), 1887-1890. |
J64 | Wibowo, A. C., Mohanty, A. K., Misra, M., & Drzal, L. T. (2004). "Chopped industrial hemp fiber reinforced cellulosic plastic biocomposites: Thermomechanical and morphological properties". Industrial & engineering chemistry research, 43(16), 4883-4888. |
J63 | Misra, M., Park, H., Mohanty, A. K., & Drzal, L. T. (2004). "Sustainable nanocomposite materials from cellulosic plastics". Nanotech, 3, 316-319. |
J62 | Mohanty, A. K. (2004). "Guest editorial: AIChE". Composites Part A: Applied Science and Manufacturing, 35(3), 295. |
2003 | |
J61 | Mishra, S., Mohanty, A. K., Drzal, L. T., Misra, M., Parija, S., Nayak, S. K., & Tripathy, S. S. (2003). "Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites". Composites Science and Technology, 63(10), 1377-1385. |
J60 | Rout, J., Misra, M., Mohanty, A. K., Nayak, S. K., & Tripathy, S. S. (2003). "SEM observations of the fractured surfaces of coir composites". Journal of reinforced plastics and composites, 22(12), 1083-1100. |
J59 | Mohanty, A. K., Wibowo, A., Misra, M., & Drzal, L. T. (2003). "Development of renewable resource-based cellulose acetate bioplastic: Effect of process engineering on the performance of cellulosic plastics". Polymer Engineering & Science, 43(5), 1151-1161. |
J58 | Dwan'Isa, J. P. L., Mohanty, A. K., Misra, M., Drzal, L. T., & Kazemizadeh, M. (2003). "Novel biobased polyurethanes synthesized from soybean phosphate ester polyols: Thermomechanical properties evaluations". Journal of Polymers and the Environment, 11(4), 161-168. |
2002 | |
J57 | Mohanty, A. K., Drzal, L. T., & Misra, M. (2002). "Novel hybrid coupling agent as an adhesion promoter in natural fiber reinforced powder polypropylene composites". Journal of materials science letters, 21(23), 1885-1888. |
J56 | Mishra, S., Tripathy, S. S., Misra, M., Mohanty, A. K., & Nayak, S. K. (2002). "Novel eco-friendly biocomposites: Biofiber reinforced biodegradable polyester amide composites-fabrication and properties evaluation". Journal of Reinforced Plastics and Composites, 21(1), 55-70. |
J55 | Mohanty, A. K., Drzal, L. T., & Misra, M. (2002). "Engineered natural fiber reinforced polypropylene composites: Influence of surface modifications and novel powder impregnation processing". Journal of adhesion science and technology, 16(8), 999-1015. |
J54 | Chander, K., Mohanty, A., & Joergensen, R. (2002). "Decomposition of biodegradable packing materials jute, Biopol, BAK and their composites in soil". Biology and fertility of soils, 36(5), 344-349. |
J53 | Dash, B. N., Sarkar, M., Rana, A. K., Mishra, M., Mohanty, A. K., & Tripathy, S. S. (2002). "A study on biodegradable composite prepared from jute felt and polyesteramide (BAK)". Journal of reinforced plastics and composites, 21(16), 1493-1503. |
J52 | Mishra, S., Misra, M., Tripathy, S. S., Nayak, S. K., & Mohanty, A. K. (2002). "The influence of chemical surface modification on the performance of sisal-polyester biocomposites". Polymer Composites, 23(2), 164-170. |
J51 | Mohanty, A. K., Misra, M., & Drzal, L. T. (2002). "Sustainable bio-composites from renewable resources: Opportunities and challenges in the green materials world". Journal of Polymers and the Environment, 10(1-2), 19-26. |
J50 | Rout, J., Misra, M., Tripathy, S. S., Nayak, S. K., & Mohanty, A. K. (2002). "Surface modification of coir fibers. II. Cu(II) - 1O4 initiated graft copolymerization of acrylonitrile onto chemically modified coir fibers". Journal of applied polymer science, 84(1), 75-82. |
2001 | |
J49 | Mishra, S., Misra, M., Tripathy, S. S., Nayak, S. K., & Mohanty, A. K. (2001). "Graft copolymerization of acrylonitrile on chemically modified sisal fibers". Macromolecular materials and engineering, 286(2), 107-113. https://doi.org/10.1002/1439-2054(20010201)286:2107::AID-MAME1073.0.CO;2-0 |
J48 | Rout, J., Misra, M., Tripathy, S. S., Nayak, S. K., & Mohanty, A. K. (2001). "The influence of fibre treatment on the performance of coir-polyester composites". Composites Science and Technology, 61(9), 1303-1310. |
J47 | Rout, J., Tripathy, S. S., Misra, M., Mohanty, A. K., & Nayak, S. K. (2001). "The influence of fiber surface modification on the mechanical properties of co-polyester composites". Polymer Composites, 22(4), 468-476. |
J46 | Mohanty, A. K., Misra, M., & Drzal, L. T. (2001). "Surface modifications of natural fibers and performance of the resulting biocomposites: An overview".Composite Interfaces, 8(5), 313-343. |
J45 | Bismarck, A., Mohanty, A. K., Aranberri-Askargorta, I., Czapla, S., Misra, M., Hinrichsen, G., & Springer, J. (2001). "Surface characterization of natural fibers; surface properties and the water up-take behavior of modified sisal and coir fibers". Green chemistry, 3(2), 100-107. |
J44 | Rout, J., Misra, M., Tripathy, S. S., Nayak, S. K., & Mohanty, A. K. (2001). "Novel eco-friendly biodegradable co-polyester amide biocomposites: Fabrication and properties evaluation". Polymer composites, 22(6), 770-778. |
J43 | Parija, S., Mohnaty, A. K., Misra, M., Nayak, S. K., & Tripathy, S. S. (2001). "Studies on synthesis, characterization and adhesive strength evaluation of KFA substituted resole adhesives". Polymers for Advanced Technologies,12(7), 407-414. |
J42 | Parija, S., Misra, M., & Mohanty, A. K. (2001). "Studies of natural gum adhesive extracts: An overview". Journal of Macromolecular Science, Part C: Polymer Reviews, 41(3), 175-197. |
J41 | Rout, J., Tripathy, S. S., Misra, M., & Mohanty, A. K. (2001). "Scanning electron microscopy study of chemically modified coir fibers". Journal of Applied Polymer Science, 79(7), 1169-1177. https://doi.org/10.1002/1097-4628(20010214)79:71169::AID-APP303.0.CO;2-Q |
J40 | Mishra, S., Misra, M., Tripathy, S. S., Nayak, S. K., & Mohanty, A. K. (2001). "Potentiality of pineapple leaf fibre as reinforcement in PALF-polyester composite: Surface modification and mechanical performance". Journal of Reinforced Plastics and Composites, 20(4), 321-334. |
2000 | |
J39 | Mohanty, A. K., Tripathy, P. C., Misra, M., Parija, S., & Sahoo, S. (2000). "Chemical modification of pineapple leaf fiber: Graft copolymerization of acrylonitrile onto defatted pineapple leaf fibers". Journal of applied polymer science, 77(14), 3035-3043. https://doi.org/10.1002/1097-4628(20000929)77:143035::AID-APP203.0.CO;2-T |
J38 | Mohanty, A. K., Khan, M. A., & Hinrichsen, G. (2000). "Surface modification of jute and its influence on performance of biodegradable jute-fabric/Biopol composites". Composites Science and Technology, 60(7), 1115-1124. |
J37 | Mohanty, A. K., Khan, M. A., & Hinrichsen, G. (2000). "Influence of chemical surface modification on the properties of biodegradable jute fabrics - polyester amide composites". Composites Part A: Applied Science and Manufacturing, 31(2), 143-150. |
J36 | Parija, S., Mohanty, A. K., Misra, M., & Nayak, S. K. (2000). "Evaluation of physico-mechanical properties of biodegradable kendu gum dust filled polyolefin blends". Polymer degradation and stability, 67(1), 7-12. |
J35 | Mohanty, A. K., Khan, M. A., Sahoo, S., & Hinrichsen, G. (2000). "Effect of chemical modification on the performance of biodegradable jute yarn-Biopol® composites". Journal of Materials Science, 35(10), 2589-2595. |
J34 | Mohanty, A. K., Misra, M., & Hinrichsen, G. (2000). "Biofibres, biodegradable polymers and biocomposites: An overview". Macromolecular materials and Engineering, 276(1), 1-24. https://doi.org/10.1002/(SICI)1439-2054(20000301)276:11::AID-MAME13.0.CO;2-W |
J33 | Bismarck, A., Springer, J., Mohanty, A. K., Hinrichsen, G., & Khan, M. A. (2000). "Characterization of several modified jute fibers using zeta-potential measurements". Colloid and polymer science, 278(3), 229-235. |
1999 | |
J32 | Rout, J., Misra, M., & Mohanty, A. K. (1999). "Surface modification of coir fibers I: Studies on graft copolymerization of methyl methacrylate on to chemically modified coir fibers". Polymers for Advanced Technologies, 10(6), 336-344 https://doi.org/10.1002/(SICI)1099-1581(199906)10:6336::AID-PAT8843.0.CO;2-O |
J31 | Parija, S., Misra, M., Mohanty, A. K., & Nayak, S. K. (1999). "Studies on effective bond strength of Kendu fruit adhesive". Polymer-Plastics Technology and Engineering, 38(5), 1107-1119. |
J30 | Mohanty, A. K., Misra, B., Misra, M., & Panigrahi, A. K. (1999). "Nucleophilic displacement polymerlzation of N, N'-BIS (p-Chlorobenzylidine)-4, 4'-diaminodiphenyl ether with sodium sulfide". Polymer-Plastics Technology and Engineering, 38(4), 783-792. |
J29 | Tripathy, P. C., Misra, M., Parija, S., Mishra, S., & Mohanty, A. K. (1999). "Studies of Cu(II)-IO4 initiated graft copolymerization of methyl methacrylate from defatted pineapple leaf fibres". Polymer international,48(9), 868-872. https://doi.org/10.1002/(SICI)1097-0126(199909)48:9868::AID-PI2303.0.CO;2-B |
1998 | |
J28 | Mohanty, A. K., Das, D., Panigrahi, A. K., & Misra, M. (1998). "Synthesis and characterization of a novel polyamide: Polycondensation of 2, 5-diaminothiazole with terephthalic acid". European polymer journal, 34(12), 1889-1892. |
J27 | Misra, M., Das, D., Padhi, K. B., Panigrahi, A. K., & Mohanty, A. K. (1998). "Synthesis and characterization of a novel heterocyclic poly(schiff base sulfide) polymer: Nucleophilic displacement polymerization of N, N-Bis (p-chlorobenzylidine)-2, 6-diaminopyridine with sodium sulfide". Journal of Macromolecular Science, Part A: Pure and Applied Chemistry, 35(5), 867-873. |
J26 | Mohanty, A. K., Parija, S., & Misra, M. (1998). "Characterization of gum adhesive from a renewable resource: Kendu fruit". Journal of Polymer Materials, 15(3), 311-315. |
J25 | Samantoroy, S., Mohanty, A.K.., Misra, M. (1998). "Removal of Cr (VI) by different adsorbents- A comparative study". Indian Journal for Environmental Protection,18, 679-682. |
1997 | |
J24 | Mohanty, A. K., Misra, M., & Misra, B. (1997). "Nucleophilic displacement polymerization of N, N-Bis (P-chlorobenzylidine)-4, 4-diaminodiphenyl methane with sodium sulfide". European polymer journal, 33(7), 1087-1091. |
J23 | Samantaroy, S., Mohanty, A. K., & Misra, M. (1997). "Removal of hexavalent chromium by Kendu fruit gum dust". Journal of applied polymer science, 66(8), 1485-1494. https://doi.org/10.1002/(SICI)1097-4628(19971121)66:81485::AID-APP93.0.CO;2-A |
J22 | Parija, S., Misra, M., & Mohanty, A. K. (1997). "Studies on basic chemistry and some physico-chemical properties of gum adhesive from a renewable resource: Kendu fruit". Journal of Polymer Materials, 14(4), 297-301. |
1996 | |
J21 | Mohanty, A. K., Parija, S., & Misra, M. (1996). "Ce (IV)-N-acetylglycine initiated graft copolymerization of acrylonitrile onto chemically modified pineapple leaf fibers". Journal of applied polymer science, 60(7), 931-937. https://doi.org/10.1002/(SICI)1097-4628(19960516)60:7931::AID-APP23.0.CO;2-N |
J20 | Mohanty, A. K., Misra, M., Pattnaik, D., & Tripathy, P. C. (1996). "Ce (IV)-N-acetylglycine initiated graft copolymerization of methyl methacrylate onto chemically modified pineapple leaf fibers". Polymer-Plastics Technology and Engineering, 35(3), 403-415. |
1995 | |
J19 | Mohanty, A. K., & Misra, M. (1995). "Graft polymerization of acrylonitrile onto chemically modified bleached jute fibers". Die Angewandte Makromolekulare Chemie, 225(1), 1-9. |
J18 | Mohanty, A. K., & Misra, M. (1995). "Studies on jute composites- A literature review". Polymer-Plastics Technology and Engineering, 34(5), 729-792. |
1994 | |
J17 | Mohanty, A. K., Misra, M., & Singh, B. C. (1994). "Kinetics of retarded polymerization: investigation of the retardation of peroxydisulfate/thiourea-initiated polymerization of acrylonitrile by phenol". Polymer-Plastics Technology and Engineering, 33(2), 207-219. |
1989 | |
J16 | Das, J., Mohanty, A.K., Singh, B.C., (1989). "Fenton's reagent-initiated graft copolymerization of acrylonitrile onto jute fibers". Journal of Polymeric Materials, 6, 91-96. |
J15 | Mohanty, A. K., Patnaik, S., Singh, B. C., & Misra, M. (1989). "Graft copolymerization of acrylonitrile onto acetylated jute fibers". Journal of applied polymer science, 37(5), 1171-1181. |
J14 | Patnaik, S., Sarangi, S., Mohanty, A. K., & Singh, B. C. (1989). "Graft copolymerization of acrylonitrile onto jute fibers (studies on Ce (IV)-Phippuric acid redox system)". Journal of Applied Polymer Science, 37(8), 2099-2107. |
J13 | Mohanty, A. K., & Singh, B. C. (1989). "Characterization of methyl methacrylate grafted jute fibers". Journal of applied polymer science, 37(5), 1423-1427. |
J12 | Das, J., Mohanty, A. K., & Singh, B. C. (1989). "Fenton's reagent initiated graft copolymerization of methyl methacrylate onto jute fibers". Textile Research Journal, 59(9), 525-529. |
1988 | |
J11 | Misra, M., Mohanty, A. K., & Singh, B. C. (1988). "Studies on aqueous polymerization of acrylonitrile. Peroxodisulfate-thiourea redox system". Die Angewandte Makromolekulare Chemie, 157(1), 79-91. |
J10 | Mohanty, A. K., & Singh, B. C. (1988). "Radiation-induced and photoinduced grafting onto cellulose and cellulosic materials". Polymer-Plastics Technology and Engineering, 27(4), 435-466. |
1987 | |
J9 | Mohanty, A. K. (1987). "Graft copolymerization of vinyl monomers onto jute fibers". Journal of Macromolecular Science-Reviews in Macromolecular Chemistry and Physics, 27(3-4), 593-639. |
J8 | Mohanty, A. K., Singh, B. C., & Misra, M. (1987). "Kinetics of retarded polymerization: Investigation of the retardation of V5+ - thiourea initiated polymerization of methyl acrylate by phenol". Journal of Polymer Science Part A: Polymer Chemistry, 25(8), 2107-2116. |
J7 | Misra, M., Mohanty, A. K., & Singh, B. C. (1987). "A study on grafting of methyl methacrylate onto jute fiber (S2O-thiourea redox system)".Journal of applied polymer science, 33(8), 2809-2819. |
J6 | Mohanty, A. K., Singh, B. C., & Misra, M. (1987). "Studies on graft copolymerization of methyl methacrylate onto chemically modified tussa silk fibers. Peroxydisulfate-thiourea redox system". Die Angewandte Makromolekulare Chemie, 150(1), 65-79. |
J5 | Mohanty, A. K., & Singh, B. C. (1987). "Redox-initiated graft copolymerization onto modified jute fibers". Journal of applied polymer science, 34(3), 1325-1327. |
J4 | Mohanty, A. K., Singh, B. C., & Misra, M. (1987). "Graft copolymerization of methyl methacrylate onto jute fibers. Studies on vanadium (V) - cyclohexanol redox system". Die Angewandte Makromolekulare Chemie, 147(1), 185-197. |
1986 | |
J3 | Mohanty, A. K., Misra, M., & Singh, B. C. (1986). "Retardation of V5+- thiourea initiated polymerization of acrylonitrile by phenol". Die Angewandte Makromolekulare Chemie, 142(1), 69-78. |
J2 | Mohanty, A. K., Singh, B. C., & Mishra, M. (1986). "Vanadium-cyclohexanone-initiated graft copolymerization of methyl methacrylate onto jute fibers". Journal of applied polymer science, 31(6), 1763-1769. |
J1 | Misra, M., Mohanty, A. K., & Singh, B. C. (1986). "Kinetic investigation on aqueous polymerization of acrylonitrile-bro3-/cyclohexanone redox system". Arabian Journal for Science and Engineering, 11(3), 259-264. |
Other BDDC Publications
Peer reviewed Journal Papers |
MC19 | Li, Y., Misra, M., & Gregori, S. (2018). "Printing green nanomaterials for organic electronics". IEEE Transactions on Components, Packaging and Manufacturing Technology, 8(7), 1307-1315. |
MC18 | Li, Y., Misra, M., & Gregori, S. (2017). “Comparison of conventional and regenerative electrostatic energy harvesters”. IET Circuits, Devices & Systems, 11(6), 638-647. |
MC17 | Li, Y., Misra, M., & Gregori, S. (2016). “Electrostatic energy harvester based on multiple variable capacitors”. IEEE International Conference on Electronics, Circuits and Systems, 500-503. |
MC16 | Ma, Z., Weersink, A., Vadori, R., & Misra, M. (2015). “Financial cost comparison of acrylonitrile butadiene styrene (ABS) and BioABS”. Journal of Biobased Materials and Bioenergy, 9(2), 244-251. |
MC15 | Mishra, A., Singh, S.K., Dash, D., Aswal, V.K., Maiti, B., Misra, M., & Maiti, P. (2014). “Self-assembled aliphatic chain extended polyurethane nanobiohybrids: Emerging hemocompatible biomaterials for sustained drug delivery”. Acta biomaterialia, 10(5), 2133-2146. |
MC14 | Fam, A., Eldridge, A., & Misra, M. (2013). “Mechanical characteristics of glass fibre reinforced polymer made of furfuryl alcohol bio-resin”. Materials and structures, 47(7), 1195-1204. |
MC13 | Konwarh, R., Karak, N., & Misra, M. (2013). “Electrospun cellulose acetate nanofibers: the present status and gamut of biotechnological applications”. Biotechnology advances, 31(4), 421-437. |
MC12 | Sain, S., Bose, M., Ray, D., Mukhopadhyay, A., Sengupta, S., Kar, T., Ennis, C.J., Rahman, P.K.S.M., & Misra, M. (2013). “A comparative study of polymethylmethacrylate/cellulose nanocomposites prepared by in situ polymerization and ex situ dispersion techniques”. Journal of Reinforced Plastics and Composites, 32(3), 147-159. |
MC11 | Jana, K. K., Vishwakarma, N. K., Ray, B., Khan, S. A., Avasthi, D. K., Misra, M., & Maiti, P. (2013). “Nanochannel conduction in piezoelectric polymeric membrane using swift heavy ions and nanoclay”. RSC advances, 3(17), 6147-6159. |
MC10 | Tiwari, V. K., Singh, N. K., Avasthi, D. K., Misra, M., & Maiti, P. (2013). “Swift heavy ions induced controlled biodegradation of poly (ε-caprolactone) nanohybrids”. Radiation Physics and Chemistry, 82, 92-99. |
MC9 | Tiwari, V. K., Prasad, A. K., Singh, V., Jana, K. K., Misra, M., Prasad, C. D., & Maiti, P. (2013). “Nanoparticle and process induced super toughened piezoelectric hybrid materials: the effect of stretching on filled system”. Macromolecules, 46(14), 5595-5603. |
MC8 | Huda, M. S., Schmidt, W. F., Misra, M., & Drzal, L. T. (2013). “Effect of fiber surface treatment of poultry feather fibers on the properties of their polymer matrix composites”. Journal of applied polymer science, 128(2), 1117-1124. |
MC7 | Singh, N. K., Singh, S. K., Dash, D., Gonugunta, P., Misra, M., & Maiti, P. (2013). “CNT Induced β-phase in polylactide: unique crystallization, biodegradation, and biocompatibility”. The Journal of Physical Chemistry C, 117(19), 10163-10174. |
MC6 | Li, Y., Misra, M., & Gregori, S. (2013). “Regenerative electrostatic energy harvester with improved output power range”. IEEE 56th International Midwest Symposium on Circuits and Systems, 133-136. |
MC5 | Maiti, S., Ray, D., Mitra, D., & Misra, M. (2012). “Study of compostable behavior of jute nano fiber reinforced biocopolyester composites in aerobic compost environment”. Journal of applied polymer science, 123(5), 2952-2958. |
MC4 | Singh, N. K., Purkayastha, B. P. D., Roy, J. K., Banik, R. M., Gonugunta, P., Misra, M., & Maiti, P. (2011). “Tuned biodegradation using poly (hydroxybutyrate-co-valerate) nanobiohybrids: emerging biomaterials for tissue engineering and drug delivery”. Journal of Materials Chemistry, 21(40), 15919-15927. |
MC3 | Mistri, E., Routh, S., Ray, D., Sahoo, S., & Misra, M. (2011). “Green composites from maleated castor oil and jute fibres”. Industrial Crops and Products, 34(1), 900-906. |
MC2 | Sgriccia, N., Hawley, M. C., & Misra, M. (2008). “Characterization of natural fiber surfaces and natural fiber composites”. Composites Part A: Applied Science and Manufacturing, 39(10), 1632-1637. |
MC1 | Zampaloni, M., Pourboghrat, F., Yankovich, S.A., Rodgers, B.N., Moore, J., Drzal, L. T., & Misra, M. (2007). “Kenaf natural fiber reinforced polypropylene composites: a discussion on manufacturing problems and solutions”. Composites Part A: Applied Science and Manufacturing, 38(6), 1569-1580. |
Conference Proceedings |
MB7 | Lipski, M., Li, Y., Misra, M., & Gregori, S. (2018). "A low forward bias active diode circuit for electrostatic energy harvesters". In 2018 IEEE International Symposium on Circuits and Systems (ISCAS) (pp. 1-5). IEEE. |
MB6 | Li, Y., Misra, M., & Gregori, S. (2016). "Electrostatic energy harvester based on multiple variable capacitors". In 2016 IEEE International Conference on Electronics, Circuits and Systems (ICECS) (pp. 500-503). IEEE. |
MB5 | Li, Y., Misra, M., & Gregori, S. (2014). "Model and prototype of a green electrostatic harvester of vibration energy". In 2014 IEEE 57th International Midwest Symposium on Circuits and Systems (MWSCAS) (pp. 53-56). IEEE. |
MB4 | Li, Y., Misra, M., & Gregori, S. (2014). "Multistage electrostatic energy harvester without startup battery". In 2014 IEEE 27th Canadian Conference on Electrical and Computer Engineering (CCECE) (pp. 1-4). IEEE. |
MB3 | Li, Y., Misra, M., & Gregori, S. (2013). "Regenerative electrostatic energy harvester with improved output power range". In 2013 IEEE 56th International Midwest Symposium on Circuits and Systems (MWSCAS) (pp. 133-136). IEEE. |
MB2 | Li, Y., Misra, M., & Gregori, S. (2013). "Model and design considerations for multistage electrostatic microgenerators"0. In 2013 IEEE International Symposium on Circuits and Systems (ISCAS) (pp. 21-24). IEEE. |
MB1 | Li, Y., Misra, M., & Gregori, S. (2012). "Lowinput voltage charge pump with dynamic body biasing". In 2012 25th IEEE Canadian Conference on Electrical and Computer Engineering (CCECE) (pp. 1-4). IEEE. |
Conference Presentations |
MA2 | Y. Li, M. Misra & S. Gregori. (2016). "Printing patterns of conducive graphene coated cellulose for flexible electronics". International Symposium on Bioplastics, Biocomposites and Biorefining (ISBBB). |
MA1 | Y. Li, M. Misra and S. Gregori. (2014). "Model and prototype of green electrostatic harvester based on carbon-coated nanocellulose conductive films". International Symposium on Bioplastics, Biocomposites and Biorefining (ISBBB). |
Keynote/Plenary/Invited Presentations
Keynote/Plenary Presentations by Prof. Mohanty
Keynote/Plenary Presentations by Prof. Misra
2023 | |
KP-MM | Misra, M. (2023). "Sustainable Polymer Composites for Lighter and Safer Electric Vehicles". 14th International Conference on Advancements in Polymeric Materials. (APM 2023). Bengaluru, India. March 17th-19th, 2023. (Plenary) |
2022 | |
KP-MM | Misra, M. (2022). "Their Lightweight Sustainable Green Composite Materials from Advanced Biocarbons: A Path Forward to Circular BioEconomy" Canadian Chemical Engineering Conference 2022 (CCEC 2022). Vancouver, BC. Oct 23-26, 2023. (Keynote) |
KP-MM | Misra, M. (2022). "Advanced Biocarbons from Renewable Resources and Their Lightweight Sustainable Composite Materials: Current Status and Future Directions". GS3T 2022. Virtual. September 15, 2022. (Plenary) |
KP-MM | Misra, M. (2022). "Plastic Waste Challenges to Sustainable Materials Through a Global Circular Economy Approach". International Conference on Smart Innovations for Society. Virtual. May 6, 2022. (Keynote) |
KP-MM | Misra, M. (2022). "Advanced Biocarbons and their Lightweight Sustainable Green Composite Materials: A Path Forward to Circular Bioeconomy". Adv. Materials Science. Virtual. March 23, 2022. (Keynote) |
KP-MM | Misra, M. (2022). "Plastic Waste Challenges to Sustainable Materials; A Global Circular Economy Approach". 13th International Conference on Advancements in Polymeric Materials (APM 2022). Virtual. March 8, 2022. (Plenary) |
2021 | |
KP-MM | Misra, M. (2021). "Single-use Plastics: Challenges & Alternatives" 27th Bio-Environmental Polymer Society Meeting (BEPS 27). Virtual. June 23-25, 2021. (Plenary) |
KP-MM | Misra, M. (2021). "Downstream corn oil from bioethanol industry: A versatile green feedstock for advanced material application". American Oil Chemics Society Annual Meeting 2021. (AOCs 2021). Virtual. May 3-14, 2021. (Keynote) |
KP-MM | Misra, M. (2021). “Biocarbon from slow pyrolysis of non-food biomass and agri-food industry waste and their biocomposites in advanced manufacturing uses: A pathway to low-carbon economy and a sustainable society”. 12th International Conference on Advancements in Polymeric Materials (APM2021). Bhubaneswar, India. March 9-13, 2021. (Plenary) |
2020 | |
KP-MM | Misra, M. (2020). "Recent developments of PLA in durable applications". 6th PLA World Congress. Germany - Virtual. October 7-8, 2020. (Keynote) |
KP-MM | Misra, M. (2020) "Can biodegradable plastics alleviate single-use plastic waste? Challenges and opportunities in the sustainable packaging sector". Sustainable Packaging Symposium. Virtual. June 29- July 2, 2020. (Keynote) |
KP-MM | Misra, M. (2020). "Bio-Composites and Circular Economy: The Current Status and Future Directions". 2020 Biocomposites Research Network Conference. Virtual Conference. May 11, 2020. (Keynote) |
2019 | |
KP-MM | Misra, M. (2019). "Sustainable Packaging: Stiffness-toughness Balanced Green Composites based on Polylactide Ternary Blends". 5th International Symposium on Advances in Sustainable Polymers. Kyoto, Japan. October 14-18, 2019. (Keynote) |
KP-MM | Misra, M. (2019). "Sustainable super‐tough nanostructured biobased polymer blends: Processing, characterization and applications." 35th International Conference of the Polymer Processing Society (PPS-35) Annual Meeting. Cesme-Ismir, Turkey. May 26-30, 2019. (Keynote) |
KP-MM | Misra, M. (2019). "Working towards a Circular Economy through the Innovation of Bioproducts" ASM International, Material Information Society. Windsor, Ontario, Canada. May 1, 2019. (Keynote) |
KP-MM | Misra, M. (2019). "Innovations in nanostructured biobased polymers: challenges and opportunities" 26th BioEnvironmental Polymer Society (BEPS) Annual Meeting 2019. Greenville, South Carolina, USA. June 5-7, 2019. (Keynote) |
2018 | |
KP-MM | Misra, M.(2018). "Opportunity of Biocarbon in Next Generation Materials Application". International Conference on Bioinspired and Biobased Chemistry & Materials. Nice, France. October 14 – 17, 2018. (Keynote) |
KP-MM | Misra, M. (2018). "Sustainable green packaging: global transition towards a circular economy". Bioenvironmental Polymer Society Annual Meeting. (BEPS 2018.) New York, USA. (Keynote) |
KP-MM | Misra, M. (2018). "Reinforcing poly(lactic acid) films with bacterial nanocellulose (BNC) and cellulose nanofibrils (CNF)" . ISBBB 2018. Guelph, Ontario. July 24-27, 2018. (Keynote) |
2017 | |
KP-MM | Misra, M. (2017). "Lignin in Biobased Materials Uses: Opportunities and Challenges in Novel Value-Added Industrial Applications". International Forest Biorefining Conference 2017. (IFBC 2017). Thunder Bay, On. May 9-11, 2017. (Keynote) |
Invited Presentations by Prof. Mohanty
2021 | |
IP49 | Mohanty, A.K. (2021). “Improved utilization of downstream products from bioethanol industry for new industrial applications”. Bioproducts Agri-Science Research Cluster Webinar – Bioindustrial Innovation Canada (BIC). February 23-25, 2021. |
2020 | |
IP48 | Mohanty, A.K. (2020). “PLA-based blends and their green composites supporting circular economy for improved sustainability”. 6th PLA World Congress Webinar, Germany. October 7-8, 2020. |
IP47 | Mohanty, A.K. (2020). "Circular economy driven biocomposites- A renewal for innovation in sustainable packaging". Sustainable Packaging Symposium. Virtual Conference. June 29 - July2, 2020. |
IP46 | Mohanty, A.K. (2020). "Circular economy driven sustainable materials: Future is now in mitigating climate change". Fibrenamics International on Shaping the Future with Sustainable Materials - Opportunities after the Pandemic. Virtual Workshop. June 3, 2020. |
2019 | |
IP45 | Mohanty, A.K. (2019). "Biobased materials from sustainable resources - A circular approach towards innovations". Gordon Research Conference. Newry, Maine, USA. July 14-19. |
IP44 | Mohanty, A. K. (2019). “Paper, light-weight carbonaneous biocomposites for auto-part uses”. American Institute of Chemical Engineers (AIChE) Annual Meeting, Orlando, Florida, USA. November 10-15, 2019. |
IP43 | Mohanty, A.K. (2019). "Circular economy towards improved sustainability of bioplastics and biomaterials - Green packaging to ecofriendly light-weight auto-parts". Symposium on Biotechnology for Fuels and Chemicals. Seattle, WA, USA. April 28-May 1, 2019. |
2018 | |
IP42 | Mohanty, A.K., Anstey, A., Codou, A., and Misra, M. (2018). “Integrating sustainable biocarbon in lightweight and durable biocomposite solutions for automotive applications”. American Institute of Chemical Engineers Annual Meeting 2018. Pittsburgh, Pennsylvania, USA. October 28 – November 2, 2018. |
IP41 | Mohanty, A.K. (2018). "Charting the path to a sustainable economy". Panel. Resource Recovery Partnership Conference 2018. Ontario, Canada. Jun 21-22, 201 |
2017 | |
IP40 | Mohanty, A.K. (2017). “Biobased & “Green”. Materials R&D Overview: @ BDDC UofG” ORF-RE Advisory Board Presentation, Ministry Research of Innovation and Science. |
2016 | |
IP39 | iMohanty, A.K. (2016). “Biocarbon applications- Current status and future directions”. 2016 AIChE Annual Meeting. San Francisco, California. |
IP38 | Mohanty, A.K., Misra, M., Zarrinbakhsh, N., Muthuraj, R. Wang, T, Rodriguez-Uribe, A., and Vivekanandhan, S. (2016). "Compostable biocomposites from hybrid bioplastics and natural fibres for sustainable packaging". Polymer Processing Society Asia/Australia Conference (PPS) 2016, Chengdu, China. |
2015 | |
IP37 | Mohanty, A.K., Ogunsona, E., & Misra, M. (2015). "Sustainable green composites from bio-nylon and biochar". American Institute of Chemical Engineers (AIChE) Annual Meeting 2015. |
IP36 | Mohanty, A.K., Vivekanandhan, S., & Misra, M. (2015). "Advanced biorefinery towards a new innovation in biocomposites uses: How sustainable this journey is!" American Society for Composites 30th Annual Technical Conference. East Lansing, Michigan. |
IP35 | Mohanty, A.K., Vivekanandhan, S., Anstey, A., & Misra, M. (2015). "Sustainable composites from renewable biochar and engineering plastic". 20th International Conference on Composite Materials (ICCM20). Copenhagen, Denmark. |
IP34 | Mohanty, A.K. (2015). “Collaboration opportunities in biomaterials”. Ontario-China Biomaterial Workshop. |
2014 | |
IP33 | Mohanty, A.K. (2014). “Advanced biorefinery towards a sustainable bioeconomy: Value-added biobased materials”. American Institute of Chemical Engineers (AIChE) Annual Meeting 2014. Atlanta, Georgia, USA. |
IP32 | Mohanty, A.K & Misra, M. (2014). "Biobased materials IV: Value-added coproducts introductory remarks". American Institute of Chemical Engineers (AIChE) Annual Meeting 2014, Atlanta, Georgia. |
2013 | |
IP31 | Mohanty, A.K. & Misra, M. (2013). "Role of value added biobased materials in sustainable biorefining". AIChE Annual Meeting, San Francisco, California. |
IP30 | Mohanty, A.K., Wagner, A., Poursorkhabi, V., & Misra, M. (2013). "Novel porous electrospun fibers from blends of poly(L-lactic acid)/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) for advanced air filters in automotive". Society of Plastics Engineers (SPE) Automotive Composites Conference & Exhibition (ACCE). |
IP29 | Mohanty, A.K. & Misra, M. (2013). "Role of value added biobased materials in sustainable biorefining". AIChE Annual Meeting. |
IP28 | Mohanty, A.K., *Zhang, K., & Misra, M. (2013). "A new biodegradable bioplastic ternary blend as new matrix system for biocomposite uses". International Conference on Composite Materials (ICCM). |
IP27 | Mohanty, A.K., Ngo, A.D., Misra, M., Nagarajan, V., & Cardonne, M. (2013). "Flexural fatigue behaviour of new engineered biocomposites from Poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV)/Poly(butylene adipate-co-terephthalate) (PBAT) blends and switchgrass". International Conference on Composite Materials (ICCM). |
2012 | |
IP26 | Mohanty, A.K., Vivekanandhan, S., Zarrinbakhsh, N. & Misra, M. (2012). "Improved utilization of co-products from biofuel industries in new biomaterials uses: A move towards sustainable biorefinery". SPE ANTEC. |
IP25 | Mohanty, A.K., Deka, H., & Misra, M. (2012). "Recent development on green composites from natural fiber and Poly(furfural alcohol) bioresin". SPE ANTEC. |
IP24 | Mohanty, A.K., Misra, M., Jacob, S., & Panesar, S. (2012). "Graft copolymerization of Vinyl Acetate on to Lignin: Synthesis, characterization and value-added uses in green manufacturing". BioEnvironmental Polymer Society. |
IP23 | Mohanty, A.K. & Misra, M. (2012). "In situ compatibilized blends of poly(hydroxybutyrate-co-valerate), PHBV and poly(butylene succinate), PBS". BioEnvironmental Polymer Society. |
2011 | |
IP22 | Mohanty, A.K., Misra, M., Nagarajan, V., & Reddy, J. (2011). "Bioplastics and green composites from renewable resources: Where we are and future directions!" 18th International Conference on Composite Materials (ICCM18). Jeju, Korea. |
IP21 | Mohanty, A.K., Zarrinbakhsh, N., & Misra, M. (2011). "Green composites from co-products of biofuel industries: A new paradigm towards value-added industrial uses". 18th International Conference on Composite Materials (ICCM18). Jeju, Korea. |
IP20 | Mohanty, A.K., Zarrinbakhsh, N., Sahoo, S., Vivekanandhan, S., Gonugunta, P., Reddy, M., Zhou, X., and Misra, M. (2011). "Value-added industrial uses of co-products from biofuel industries: A new paradigm towards sustainability". 19th Annual BEPS Meeting, Vienna, Austria. |
2010 | |
IP19 | Mohanty, A.K., Sahoo, S., & Misra, M. (2010). "Green composites from engineered lignin and bioplastic for interior automotive part manufacturing". 11th International Conference on Biocomposites: Transition to Green Materials, Toronto, Canada-Ontario. |
IP18 | Mohanty, A.K., Jain, S., Reddy, M.M., Misra, M., & Ghosh, A.K. (2010). "Structure-property relationship of Polylactic acid (PLA)/ Polycaprolactone (PCL)/Talc composites films for packaging application". Annual Meeting of the Polymer Processing Society. |
2009 | |
IP17 | Mohanty, A.K., Sahoo, S., & Misra, M. (2009). "Lignin based novel blends and composites". American Institute of Chemical Engineers (AIChE) Annual Meeting 2009. |
IP16 | Mohanty, A.K., Sahoo, S., & Misra, M. (2009). "Novel green composites from low cost filler and lignin & nano lignin". 2009 Material Resource Society fall meeting. |
2007 | |
IP15 | Mohanty, A.K. & Parulekar, Y. (2007). "Biobased materials from Polyhydroxyalkanoate and thermoplastic starch blends and their biocomposites: Opportunities and challenges". AIChE Annual Meeting, Salt Lake City, Utah. |
IP14 | Mohanty, A.K. & Parulekar, Y. (2007). "Polyhydroxybutyrate-co-valerate (PHBV) and Thermoplastic Starch (TPS) based blends and their talc-filled biocomposites". International Symposium on Polymers and the Environment: Emerging Technology And Science, Vancouver, Washington. |
IP13 | Mohanty, A.K. & Bhardwaj, R. (2007). "Nano-structure controlled bioplastics and their hierachical nano-biocomposites". SAE 2007 World Congress, Detroit, Michigan. |
IP12 | Mohanty, A.K., Wu, Q., & Selke, S. (2007). "Renewable resource-based green materials from soy meal and natural rubber blends". USB Thermoset Plastics TAP Meeting, Detroit, Michigan. |
IP11 | Mohanty, A.K. & Bhardwaj, R. (2007). "Nanostructure controlled biological polyesters: New opportunities in green materials research". 233rd ACS National Meeting, Chicago, Illinois. |
2006 | |
IP10 | Mohanty, A.K. & Bhardwaj, R. (2006). "Hierarchical truly green nano-biocomposites based on a nano structure controlled bioplastic". Forest and Biobased Products II at AIChE 2006 Annual Meeting, San Francisco, California. |
2005 | |
IP9 | Mohanty, A.K. & Bhardwaj, R. (2005). "Dendritic hyperbranched polymer modified bioplastics: A new hope in green material research". AIChE Annual Meeting, Cincinnati, Ohio. |
IP8 | Mohanty, A.K & Bhardwaj, R. (2005). "Green composites from recycled newspaper fibers and polyhydroxyalkanoate bioplastics: Challenges and Opportunities". 2nd International Conference on Green and Sustainable Chemistry and 9th Annual Green Chemistry and Engineering Conference, Washington, District of Columbia. |
IP7 | Mohanty, A.K., Miyagawa, H., Burgueno, R., & Misra, M. (2005). "Biobased nanocomposites from organo-clay and blends of unsaturated polyester and functionalized vegetable oil". SPE ANTEC, Boston, Massachusetts. |
2004 | |
IP6 | Mohanty, A.K., Park, H., Misra, M., & Drzal, L. T. (2004). "Effect of maleated compatibilizer on nanostructure of the biodegradable cellulose ester-layered silicate nanocomposites". Nanoscale Structure in Polymers IV, American Institute of Chemical Engineers (AIChE) 2004 Annual Conference, Austin, Texas. |
IP5 | Mohanty, A.K., Burgueno, R., & Misra, M. (2004). "Development of hybrid natural/synthetic fiber reinforced composites for structural panel systems". Green Materials: Forest and Biobased Products session- II, American Institute of Chemical Engineers (AIChE) 2004 Annual Conference, Austin, Texas. |
IP4 | Mohanty, A.K., Park, H., Misra, M., & Drzal, L.T. (2004). "Effect of extrusion conditions on injection molded 'Green' nanocomposites from cellulose ester". 2004 Annual meeting and 20th Anniversary Celebration of the Polymer Processing Society, Akron, Ohio. |
IP3 | Mohanty, A.K., Drzal, L. T., Mulukutla, P., Desai, S. M., & Misra, M. (2004). "Green composites from biofibers and Poly(3-hydroxybutyrate)". SPE ANTEC 2004.Canada. |
IP2 | Mohanty, A.K., Liu, W., Drzal, L.T., Misra, M., & Tummala, P. (2004). “Value-added nonfood applications of soybean protein through design and engineering of "Green" plastics and their biocomposites: The hope and reality for US agriculture". 228th ACS National Meeting, Philadelphia, Pennsylvania. |
IP1 | Mohanty, A.K., Desai, S., Misra, M., & Drzal, L.T. (2004). "Solvent-free maleic anhydride grafted cellulose acetate butyrate (MA-g-CAB): Synthesis and characterizations". 227th ACS National Meeting, Anaheim, California. |
Invited Presentations by Prof. Misra
2021 | |
IP-MM | Misra, M. (2021). "Canada India Research Centre for Learning and Engagement (CIRCLE) seminar". University of Guelph - Canada India Research Centre for Learning and Engagement (CIRCLE). Virtual Seminar, Guelph, Ontario, Canada. May 3, 2021. |
2020 | |
IP-MM | Misra, M. (2020). "Can Biodegradable Plastics Alleviate Single-Use Plastic Waste? Challenges and Opportunities in the Sustainable Packaging Sector" Sustainable Packaging Symposium. Virtual Conference. June 29 - July2, 2020. |
2019 | |
IP-MM | Misra, M. (2019). "Novel tunable nano-structured biodegradable plastic blends: From research to application" Symposium on Biotechnology for Fuels and Chemicals. Seattle, WA, USA. April 28-May 1, 2019. |
IP-MM | Misra, M. (2019). "Sustainable supertough nanostructured biobased polymer blends : Processing, characterization and applications" 35th International Conference of the Polymer Processing Society (PPS-35). Annual Meeting. Cesme-Ismir, Turkey. May 26-30, 2019. |
Conference Presentations by HQP
Conference proceedings
Books and Book Chapters
Books
B6 | "Nanomaterials from Renewable Resources for Emerging Applications". Ahankari, S. S., Misra, M., & Mohanty, A.K. (2023). Published. CRC Press, Taylor and Francis Group, Boca Raton, FL. |
B5 | "Fiber Technology for Fiber Reinforced Composites". Editors: Seydibeyoglu, M. O., Mohanty, A. K., Misra, M.(2017). Woodhead Publishing Limited. |
B4 | "Biocomposites: Design and Mechanical Performance". Misra, M., Pandey, J. K., Mohanty, A. K.(2015): 524 pages. Published, Woodhead Publishing Limited. |
B3 | "Handbook of Polymer Nanocomposites". Processing, Performance and Application: Volume A: Layered Silicates" Editors: Pandey, J. K., Reddy, K. R., Mohanty, A. K., Misra, M.(2014): 538 pages. Published, Springer. |
B2 | "Packaging Nanotechnology". Editors: Mohanty, A. K., Misra, M., Nalwa, H. S.(2009): 350 pages. Published, American Scientific Publisher. |
B1 | "Natural Fibers, Biopolymers and Biocomposites". Editors: Mohanty, A. K., Misra, M., Drzal, L. T. (2005): 875 pages. Published, CRC Press, Taylor & Francis Group, Boca Raton, FL. |
Book Chapters
C26 | Ahankari, S.S., Mohanty, A.K., Misra, M. (2023). Future Outlook and Challenges in the Applicability of Green Nanomaterials, Nanomaterials from Renewable Resources for Emerging Applications: 515-520. CRC Press. |
C25 | Mithra, S.N., Ahankari, S.S., Nath, D., Mohanty, A.K., Misra, M. (2023). Processing and Characterization of Nanocomposites Containing Green Nanofillers, Nanomaterials from Renewable Resources for Emerging Applications: 25-52. CRC Press. |
C24 | Mithra, S.N., Ahankari, S.S., Mohanty, A.K., Misra, M. (2023). Introduction to Nanomaterials from Renewable Resources and Book Overview, Nanomaterials from Renewable Resources for Emerging Applications: 1-23. CRC Press. |
C23 | Drupitha, M.P., Muthuraj, R., Misra, M., Mohanty, A.K. (2022). Sustainable Biofillers and Their Biocomposites, Progress in Polymer Research for Biomedical, Energy and Specialty Applications: 45-63. CRC Press. |
C22 | Seydibeyoglu, M.O, Mohanty, A.K., Misra, M. (2017). Concluding remarks and future outlook, Fiber Technology for Fiber-reinforced Composites: 317-318. Woodhead Publishing. |
C21 | Demiroglu, S., Singaravelu, V., Seydibeyoglu, M.O, Mohanty, A.K., Misra, M. (2017). The use of nanotechnology for fibre-reinforced polymer composites, Fiber Technology for Fiber-reinforced Composites: 277-298. Woodhead Publishing. |
C20 | Seydibeyoglu, M.O, Mohanty, A.K., Misra, M. (2017). Introduction, Fiber Technology for Fiber-reinforced Composites: 1-4. Woodhead Publishing. |
C19 | Mekonnen, T. H., Misra, M., & Mohanty, A. K. (2015). Processing, Performance and Applications of Plant and Animal Protein Based Biocomposites, Biocomposites: Design and Mechanical Performance: 201-235. Woodhead Publishing. |
C18 | Muthuraj, R., Misra, M., & Mohanty, A. (2015). Studies on mechanical, thermal, and morphological characteristics of biocomposites from biodegradable polymer blends and natural fibers, Biocomposites: Design and Mechanical Performance: 93-140. Woodhead Publishing. |
C17 | Pandey, J. K., Nagarajan, V., Mohanty, A., & Misra, M. (2015). Commercial potential and competitiveness of natural fiber composites, Biocomposites: Design and Mechanical Performance: 1-15. Woodhead Publishing. |
C16 | Nyambo, C., Nagarajan, V., Mohanty, A. K., & Misra, M. (2014). Natural Fiber Composites from Agricultural By-products: An Overview, Sustainable Composites: Fibers, Resins and Applications:195-239. DEStech Publications, Inc. |
C15 | Vivekanandhan, S., Schreiber, M., Mohanty, A. K., & Misra, M. (2014). Advanced Electrospun Nanofibers of Layered Silicate Nanocomposites: A Review of Processing, Properties and Applications, Handbook of Polymer Nanocomposites. Processing, Performance and Application - Volume A: Layered Silicates: 361-385. Heidlberg: Springer [B]. |
C14 | Pandey, J. K., Lee, H. T., Takagi, H., Ahn, S. H., Saini, D. R., Misra, M. (2014). “Dispersion of Nanocellulose (NC) in Polypropylene (PP) and Polyethylene (PE) Matrix”. Handbook of Polymernanocomposites. Processing, Performance and Application – Volume C: Polymer Nano-composites of Cellulose Nano-particles. Springer-Verlag Berlin Heidelberg. |
C13 | Vivekanandhan, S., Zarrinbakhsh, N., Misra, M., & Mohanty, A. K. (2013). Coproducts of Biofuel Industries in Value-Added Biomaterials Uses: A Move Towards a Sustainable Bioeconomy, Liquid, Gaseous and Solid Biofuels - Conversion Techniques:491-541. InTech. |
C12 | Misra, M., Vivekanandhan, S., Mohanty, A., & Denault, J. (2011). Nanotechnologies for Agricultural Bioproducts, Comprehensive Biotechnology (Second Edition) - Volume 4: Agricultural and Related Biotechnologies:111-119. Published, Elsevier. |
C11 | Mohanty, A. K., Seydibeyoglu, M. O, Sahoo, S.,& Misra, M.(2011). Matching Crops for Selected Bioproducts. Comprehensive Biotechnology (Second Edition) - Volume 4: Agricultural and Related Biotechnologies:101-109. Published, Elsevier. |
C10 | Misra, M., Ahankari, S., Ray, D., Das, K., & Mohanty, A. (2011). Creep and fatigue of natural fiber composites, Interface Engineering of Natural Fibre Composites for Maximum Performance: 289-340. Published, Woodhead Publishing. |
C9 | Misra, M., Seydibeyoglu, M., Ray, D., Das, K., & Mohanty, A. (2011). Biodegradable nanocomposites from cellulosic plastics and cellulosic fiber, Nanocomposites with Biodegradable Polymers: Synthesis, Properties, and Future Perspectives: 123-165. Published, Oxford Press. |
C8 | Pandey, J. K., Alariqi, S. A. S., Saini, D. R., Ahn, S.H., & Misra, M. (2009). Nylon Nanocomposites for Packaging Applications, Packaging Nanotechnology. Edited by: Mohanty AK, Misra M, Nalwa SH.: 81-98. Published, American Scientific Publishers, Valencia, California 91381-0751, USA. |
C7 | Pandey, J. K., Lee, J. W., Chu, W. S., Saini, D. R., Mohanty, A. K., Misra, M., Lan, T., & Ahn, S. H. (2009). Nanocomposites of Polyolefin, Packaging Nanotechnology. Edited by: Mohanty AK, Misra M, Nalwa SH.: 99-142. Published, American Scientific Publishers, Valencia, California 91381-0751, USA. |
C6 | Ray, D., Pandey, J. K., Das, M., Mohanty, A. K., Ahn, S., Drzal, L. T., & Misra, M.(2009). Starch Nanocomposites for Packaging. Packaging Nanotechnology. Edited by: Mohanty AK, Misra M, Nalwa HS.: 183-204. Published, American Scientific Publishers, Valencia, California 91381-0751, USA. |
C5 | Vivekanandhan, S., Venkateswarlu, M., Satyanarayana, N., Mohanty, A., & Misra, M.(2009). Silver Nanocomposites for Anti Microbial Packaging, Packaging Nanotechnology, Edited by: Mohanty AK, Misra M, Nalwa SH.: 229-248. Published, American Scientific Publishers, Valencia, California 91381-0751, USA. |
C4 | Huda, M., Drzal, L. T., Ray, D., Mohanty, A., & Misra, M. (2008). Natural-fibre composites in the automotive sector, Properties and performance of natural-fibre composites. Edited by: Pickering K. Published, Woodhead Publishing Limited, Abington Hall, Abington, Cambridge, CB21 6AH, England. |
C3 | Dwan'Isa, J.P, Mohanty, A. K., Misra, M., & Drzal, L. T. (2005). Biobased Polyurethanes and Their Composites: Present Status and Future Perspective. Natural Fibers, Biopolymers and Biocomposites. Edited by: Mohanty, A. K., Misra, M., & Drzal, L. T.: 775-805. Published, CRC Press, Taylor & Francis Group, Boca Raton, FL. |
C2 | Mohanty, A. K., Liu, W., Tummala, P., Drzal, L., Misra, M., & Narayan, R. (2005). Soy Protein-Based Plastics, Blends, and Composites. Natural Fibers, Biopolymers and Biocomposites. Edited by: Mohanty, A. K., Misra, M., & Drzal, L. T.: 699-725. Published, CRC Press, Taylor & Francis Group, Boca Raton, FL. |
C1 | Mohanty, A. K., Misra, M., Drzal, L., Selke, S., Harte, B., & Hinrichsen, G. (2005). Natural Fibers, Biopolymers, and Biocomposites: An Introduction. Natural Fibers, Biopolymers and Biocomposites. Edited by: Mohanty, A. K., Misra, M., & Drzal, L. T.: 1-36. Published, CRC Press, Taylor & Francis Group, Boca Raton, FL. |